こんな人にお勧め
- いろんなサイトを見ても途中経過が記載してなく不安になる人
- 古いバージョンやんかと思う人
目次
スポンサーリンク
概要
AlmaLinux 8.4 の標準の dnf リポジトリでは PHP 7.4 が提供されていますが、新しくサーバーを構築する際には最新バージョンの PHP をインストールしたいですね。
本稿では AlmaLinux 8.4 に PHP 8.0 を dnf でインストールする手順について解説します。
実際のコマンドも載せてます。
PHP導入の前提条件
OSのバージョン確認
OSのバージョンは、2021年11月現在で、AlmaLinux 8.4を利用します。バージョンを確認します。
cat /etc/redhat-release コマンドで確認します。
[root@localhost ~]# cat /etc/redhat-release
AlmaLinux release 8.4 (Electric Cheetah)
[root@localhost ~]#
上記からAlmaLinux release 8.4であることが確認できました。
Apache httpdのバージョン確認
Apache httpd のバージョンを確認します。
httpd -V | head -n 1 コマンドで確認します。
[root@localhost ~]# httpd -V | head -n 1
Server version: Apache/2.4.37 (AlmaLinux)
[root@localhost ~]#
上記からApache httpdのバージョンが2.4.37 であることが確認できました。
AlmaLinux 8.4 Minimal Apache httpdをインストール初心者向けのサイトです。
いろんなサイトを見ても途中経過が記載してなく不安になる人
手順通りしたが動かない人...
PHPのインストール前の準備
デェフォルトPHPインストールの確認と削除
PHPに関するパッケージが無いことが確認できればOKです。
[root@localhost ~]# dnf list installed | grep php
[root@localhost ~]#
インストールされていれば下記のコマンドで削除してください。
dnf remove php*
remiレポジトリの追加
上記の公式サイト(rpms.remirepo.net)にあるRedhat enterprise linux 8用のremiを利用します。
dnf install https://rpms.remirepo.net/enterprise/remi-release-8.rpm コマンドで実行します。
[root@localhost ~]# dnf install https://rpms.remirepo.net/enterprise/remi-release-8.rpm
メタデータの期限切れの最終確認: 3:25:19 時間前の 2021年11月16日 12時12分47秒 に実施しました。
remi-release-8.rpm 23 kB/s | 26 kB 00:01
依存関係が解決しました。
==============================================================================================================
パッケージ アーキテクチャー バージョン リポジトリー サイズ
==============================================================================================================
インストール:
remi-release noarch 8.4-1.el8.remi @commandline 26 k
依存関係のインストール:
epel-release noarch 8-10.el8 extras 22 k
トランザクションの概要
==============================================================================================================
インストール 2 パッケージ
合計サイズ: 48 k
ダウンロードサイズの合計: 22 k
インストール後のサイズ: 52 k
これでよろしいですか? [y/N]: y
パッケージのダウンロード:
epel-release-8-10.el8.noarch.rpm 238 kB/s | 22 kB 00:00
--------------------------------------------------------------------------------------------------------------
合計 24 kB/s | 22 kB 00:00
トランザクションの確認を実行中
トランザクションの確認に成功しました。
トランザクションのテストを実行中
トランザクションのテストに成功しました。
トランザクションを実行中
準備 : 1/1
インストール中 : epel-release-8-10.el8.noarch 1/2
インストール中 : remi-release-8.4-1.el8.remi.noarch 2/2
scriptletの実行中: remi-release-8.4-1.el8.remi.noarch 2/2
検証 : epel-release-8-10.el8.noarch 1/2
検証 : remi-release-8.4-1.el8.remi.noarch 2/2
インストール済み:
epel-release-8-10.el8.noarch remi-release-8.4-1.el8.remi.noarch
完了しました!
[root@localhost ~]#
Remiレポジトリをインストールしたら有効化します。
dnf config-manager –set-enabled remi コマンドで実行します。
[root@localhost ~]# dnf config-manager --set-enabled remi
[root@localhost ~]#
PHPのインストール
インストールできるPHP8.0の確認
dnf module list php コマンドで確認します。
[root@localhost ~]# dnf module list php
メタデータの期限切れの最終確認: 0:06:40 時間前の 2021年11月16日 15時55分53秒 に実施しました。
AlmaLinux 8 - AppStream
Name Stream Profiles Summary
php 7.2 [d] common [d], devel, minimal PHP scripting language
php 7.3 common [d], devel, minimal PHP scripting language
php 7.4 common [d], devel, minimal PHP scripting language
Remi's Modular repository for Enterprise Linux 8 - x86_64
Name Stream Profiles Summary
php remi-7.2 common [d], devel, minimal PHP scripting language
php remi-7.3 common [d], devel, minimal PHP scripting language
php remi-7.4 common [d], devel, minimal PHP scripting language
php remi-8.0 common [d], devel, minimal PHP scripting language
php remi-8.1 common [d], devel, minimal PHP scripting language
ヒント: [d]efault, [e]nabled, [x]disabled, [i]nstalled
[root@localhost ~]#
インストールコマンド
dnf module install -y php:remi-8.0 コマンドでインストールします。
[root@localhost ~]# dnf module install -y php:remi-8.0
メタデータの期限切れの最終確認: 0:03:32 時間前の 2021年11月16日 16時03分11秒 に実施しました。
依存関係が解決しました。
==============================================================================================================
パッケージ Arch バージョン リポジトリー サイズ
==============================================================================================================
group/moduleパッケージをインストール:
php-cli x86_64 8.0.12-1.el8.remi remi-modular 4.7 M
php-common x86_64 8.0.12-1.el8.remi remi-modular 1.2 M
php-fpm x86_64 8.0.12-1.el8.remi remi-modular 1.6 M
php-mbstring x86_64 8.0.12-1.el8.remi remi-modular 525 k
php-xml x86_64 8.0.12-1.el8.remi remi-modular 238 k
依存関係のインストール:
libxslt x86_64 1.1.32-6.el8 baseos 248 k
oniguruma5php x86_64 6.9.7.1-1.el8.remi remi-safe 210 k
弱い依存関係のインストール:
nginx-filesystem noarch 1:1.14.1-9.module_el8.3.0+2165+af250afe.alma appstream 23 k
モジュールプロファイルのインストール中:
php/common
モジュールストリームの有効化中:
nginx 1.14
php remi-8.0
トランザクションの概要
==============================================================================================================
インストール 8 パッケージ
ダウンロードサイズの合計: 8.8 M
インストール後のサイズ: 44 M
パッケージのダウンロード:
(1/8): nginx-filesystem-1.14.1-9.module_el8.3.0+2165+af250afe.alma.noarch.rpm 194 kB/s | 23 kB 00:00
(2/8): libxslt-1.1.32-6.el8.x86_64.rpm 1.5 MB/s | 248 kB 00:00
(3/8): php-common-8.0.12-1.el8.remi.x86_64.rpm 501 kB/s | 1.2 MB 00:02
(4/8): php-fpm-8.0.12-1.el8.remi.x86_64.rpm 659 kB/s | 1.6 MB 00:02
(5/8): php-mbstring-8.0.12-1.el8.remi.x86_64.rpm 505 kB/s | 525 kB 00:01
(6/8): oniguruma5php-6.9.7.1-1.el8.remi.x86_64.rpm 377 kB/s | 210 kB 00:00
(7/8): php-cli-8.0.12-1.el8.remi.x86_64.rpm 1.0 MB/s | 4.7 MB 00:04
(8/8): php-xml-8.0.12-1.el8.remi.x86_64.rpm 90 kB/s | 238 kB 00:02
--------------------------------------------------------------------------------------------------------------
合計 1.0 MB/s | 8.8 MB 00:08
警告: /var/cache/dnf/remi-modular-6408ecca79e22107/packages/php-cli-8.0.12-1.el8.remi.x86_64.rpm: ヘッダー V4 RSA/SHA256 Signature、鍵 ID 5f11735a: NOKEY
Remi's Modular repository for Enterprise Linux 8 - x86_64 3.0 MB/s | 3.1 kB 00:00
GPG 鍵 0x5F11735A をインポート中:
Userid : "Remi's RPM repository <remi@remirepo.net>"
Fingerprint: 6B38 FEA7 231F 87F5 2B9C A9D8 5550 9759 5F11 735A
From : /etc/pki/rpm-gpg/RPM-GPG-KEY-remi.el8
鍵のインポートに成功しました
トランザクションの確認を実行中
トランザクションの確認に成功しました。
トランザクションのテストを実行中
トランザクションのテストに成功しました。
トランザクションを実行中
準備 : 1/1
scriptletの実行中: php-common-8.0.12-1.el8.remi.x86_64 1/8
インストール中 : php-common-8.0.12-1.el8.remi.x86_64 1/8
インストール中 : oniguruma5php-6.9.7.1-1.el8.remi.x86_64 2/8
scriptletの実行中: nginx-filesystem-1:1.14.1-9.module_el8.3.0+2165+af250afe.alma.noarch 3/8
インストール中 : nginx-filesystem-1:1.14.1-9.module_el8.3.0+2165+af250afe.alma.noarch 3/8
インストール中 : libxslt-1.1.32-6.el8.x86_64 4/8
インストール中 : php-xml-8.0.12-1.el8.remi.x86_64 5/8
インストール中 : php-fpm-8.0.12-1.el8.remi.x86_64 6/8
scriptletの実行中: php-fpm-8.0.12-1.el8.remi.x86_64 6/8
インストール中 : php-mbstring-8.0.12-1.el8.remi.x86_64 7/8
インストール中 : php-cli-8.0.12-1.el8.remi.x86_64 8/8
scriptletの実行中: php-cli-8.0.12-1.el8.remi.x86_64 8/8
scriptletの実行中: php-fpm-8.0.12-1.el8.remi.x86_64 8/8
検証 : libxslt-1.1.32-6.el8.x86_64 1/8
検証 : nginx-filesystem-1:1.14.1-9.module_el8.3.0+2165+af250afe.alma.noarch 2/8
検証 : php-cli-8.0.12-1.el8.remi.x86_64 3/8
検証 : php-common-8.0.12-1.el8.remi.x86_64 4/8
検証 : php-fpm-8.0.12-1.el8.remi.x86_64 5/8
検証 : php-mbstring-8.0.12-1.el8.remi.x86_64 6/8
検証 : php-xml-8.0.12-1.el8.remi.x86_64 7/8
検証 : oniguruma5php-6.9.7.1-1.el8.remi.x86_64 8/8
インストール済み:
libxslt-1.1.32-6.el8.x86_64
nginx-filesystem-1:1.14.1-9.module_el8.3.0+2165+af250afe.alma.noarch
oniguruma5php-6.9.7.1-1.el8.remi.x86_64
php-cli-8.0.12-1.el8.remi.x86_64
php-common-8.0.12-1.el8.remi.x86_64
php-fpm-8.0.12-1.el8.remi.x86_64
php-mbstring-8.0.12-1.el8.remi.x86_64
php-xml-8.0.12-1.el8.remi.x86_64
完了しました!
[root@localhost ~]#
インストールの確認
dnf list installed | grep php コマンドで確認します。
[root@localhost ~]# dnf list installed | grep php
oniguruma5php.x86_64 6.9.7.1-1.el8.remi @remi-safe
php-cli.x86_64 8.0.12-1.el8.remi @remi-modular
php-common.x86_64 8.0.12-1.el8.remi @remi-modular
php-fpm.x86_64 8.0.12-1.el8.remi @remi-modular
php-mbstring.x86_64 8.0.12-1.el8.remi @remi-modular
php-xml.x86_64 8.0.12-1.el8.remi @remi-modular
[root@localhost ~]#
php -v コマンドで確認します。
[root@localhost ~]# php -v
PHP 8.0.12 (cli) (built: Oct 19 2021 10:34:32) ( NTS gcc x86_64 )
Copyright (c) The PHP Group
Zend Engine v4.0.12, Copyright (c) Zend Technologies
[root@localhost ~]#
インストールされてることが確認できました。
これでは、必要最低限のインストールです。
インストールされているモジュールリストは、php -m コマンドで確認できます。
[root@localhost ~]# php -m
[PHP Modules]
bz2
calendar
Core
ctype
curl
date
dom
exif
fileinfo
filter
ftp
gettext
hash
iconv
json
libxml
mbstring
openssl
pcntl
pcre
Phar
readline
Reflection
session
SimpleXML
sockets
SPL
standard
tokenizer
xml
xmlreader
xmlwriter
xsl
zlib
[Zend Modules]
[root@localhost ~]#
必要に応じて依存関係をインストールしてください。
よく利用される候補
| モジュール | 用途 |
|---|---|
| php-devel | 開発用 |
| php-pecl-xdebug | デバック用拡張モジュール |
| php-opcache | 高速化 |
| php-gd | 画像処理モジュール |
| php-pear | クラスライブラリ集モジュール |
| php-pdo | データベース接続モジュール |
| php-mysqlnd | MariaDBモジュール |
| php-mysql | MySQLモジュール |
公式サイトを参照してくだい。
本稿では、よく利用されている候補をインストールします。
dnf install -y php-devel php-pecl-xdebug php-opcache php-gd php-pear php-pdo php-mysqlnd php-mysql
[root@localhost ~]# dnf install -y php-devel php-pecl-xdebug php-opcache php-gd php-pear php-pdo php-mysqlnd php-mysql
メタデータの期限切れの最終確認: 3:35:31 時間前の 2021年11月17日 02時19分49秒 に実施しました。
依存関係が解決しました。
========================================================================================================================================
パッケージ アーキテクチャー バージョン リポジトリー サイズ
========================================================================================================================================
インストール:
php-devel x86_64 8.0.12-1.el8.remi remi-modular 1.2 M
php-gd x86_64 8.0.12-1.el8.remi remi-modular 102 k
php-mysqlnd x86_64 8.0.12-1.el8.remi remi-modular 262 k
php-opcache x86_64 8.0.12-1.el8.remi remi-modular 768 k
php-pdo x86_64 8.0.12-1.el8.remi remi-modular 156 k
php-pear noarch 1:1.10.13-1.el8.remi remi-modular 366 k
php-pecl-mysql x86_64 1.0.0-0.24.20201210.6ca4fa4.el8.remi.8.0 remi-modular 43 k
php-pecl-xdebug3 x86_64 3.1.1-1.el8.remi.8.0 remi-modular 283 k
アップグレード:
e2fsprogs x86_64 1.45.6-2.el8 baseos 1.0 M
e2fsprogs-libs x86_64 1.45.6-2.el8 baseos 232 k
glibc x86_64 2.28-164.el8 baseos 3.6 M
glibc-all-langpacks x86_64 2.28-164.el8 baseos 25 M
glibc-common x86_64 2.28-164.el8 baseos 1.3 M
keyutils-libs x86_64 1.5.10-9.el8 baseos 33 k
krb5-libs x86_64 1.18.2-14.el8 baseos 839 k
libcom_err x86_64 1.45.6-2.el8 baseos 48 k
libgcc x86_64 8.5.0-3.el8.alma baseos 78 k
libgomp x86_64 8.5.0-3.el8.alma baseos 205 k
libsepol x86_64 2.9-3.el8 baseos 339 k
libss x86_64 1.45.6-2.el8 baseos 52 k
libstdc++ x86_64 8.5.0-3.el8.alma baseos 452 k
libxcrypt x86_64 4.1.1-6.el8 baseos 72 k
libxml2 x86_64 2.9.7-9.el8_4.2 baseos 695 k
openssl x86_64 1:1.1.1k-4.el8 baseos 707 k
openssl-libs x86_64 1:1.1.1k-4.el8 baseos 1.5 M
依存関係のインストール:
autoconf noarch 2.69-29.el8 appstream 710 k
automake noarch 1.16.1-7.el8 appstream 712 k
binutils x86_64 2.30-108.el8_5.1 baseos 5.8 M
cmake-filesystem x86_64 3.20.2-4.el8 appstream 43 k
cpp x86_64 8.5.0-3.el8.alma appstream 10 M
dejavu-fonts-common noarch 2.35-7.el8 baseos 73 k
dejavu-sans-fonts noarch 2.35-7.el8 baseos 1.5 M
emacs-filesystem noarch 1:26.1-7.el8 baseos 69 k
fontconfig x86_64 2.13.1-4.el8 baseos 273 k
fontpackages-filesystem noarch 1.44-22.el8 baseos 16 k
gcc x86_64 8.5.0-3.el8.alma appstream 23 M
gcc-c++ x86_64 8.5.0-3.el8.alma appstream 12 M
gd x86_64 2.2.5-7.el8 appstream 143 k
glibc-devel x86_64 2.28-164.el8 baseos 1.0 M
glibc-headers x86_64 2.28-164.el8 baseos 479 k
isl x86_64 0.16.1-6.el8 appstream 841 k
jbigkit-libs x86_64 2.1-14.el8 appstream 54 k
kernel-headers x86_64 4.18.0-348.2.1.el8_5 baseos 8.3 M
keyutils-libs-devel x86_64 1.5.10-9.el8 baseos 47 k
krb5-devel x86_64 1.18.2-14.el8 baseos 559 k
libX11 x86_64 1.6.8-5.el8 appstream 610 k
libX11-common noarch 1.6.8-5.el8 appstream 157 k
libXau x86_64 1.0.9-3.el8 appstream 37 k
libXpm x86_64 3.5.12-8.el8 appstream 58 k
libcom_err-devel x86_64 1.45.6-2.el8 baseos 37 k
libjpeg-turbo x86_64 1.5.3-12.el8 appstream 156 k
libkadm5 x86_64 1.18.2-14.el8 baseos 186 k
libmpc x86_64 1.1.0-9.1.el8 appstream 60 k
libpkgconf x86_64 1.4.2-1.el8 baseos 35 k
libselinux-devel x86_64 2.9-5.el8 baseos 199 k
libsepol-devel x86_64 2.9-3.el8 baseos 86 k
libstdc++-devel x86_64 8.5.0-3.el8.alma appstream 2.0 M
libtiff x86_64 4.0.9-20.el8 appstream 187 k
libtool x86_64 2.4.6-25.el8 appstream 708 k
libverto-devel x86_64 0.3.0-5.el8 baseos 18 k
libwebp x86_64 1.0.0-5.el8 appstream 271 k
libxcb x86_64 1.13.1-1.el8 appstream 231 k
libxcrypt-devel x86_64 4.1.1-6.el8 baseos 24 k
libxml2-devel x86_64 2.9.7-9.el8_4.2 appstream 1.0 M
m4 x86_64 1.4.18-7.el8 baseos 222 k
make x86_64 1:4.2.1-10.el8 baseos 498 k
openssl-devel x86_64 1:1.1.1k-4.el8 baseos 2.3 M
pcre2-devel x86_64 10.32-2.el8 baseos 604 k
pcre2-utf16 x86_64 10.32-2.el8 baseos 228 k
pcre2-utf32 x86_64 10.32-2.el8 baseos 220 k
perl-Carp noarch 1.42-396.el8 baseos 30 k
perl-Data-Dumper x86_64 2.167-399.el8 baseos 58 k
perl-Digest noarch 1.17-395.el8 appstream 27 k
perl-Digest-MD5 x86_64 2.55-396.el8 appstream 37 k
perl-Encode x86_64 4:2.97-3.el8 baseos 1.5 M
perl-Errno x86_64 1.28-420.el8 baseos 75 k
perl-Exporter noarch 5.72-396.el8 baseos 34 k
perl-File-Path noarch 2.15-2.el8 baseos 38 k
perl-File-Temp noarch 0.230.600-1.el8 baseos 62 k
perl-Getopt-Long noarch 1:2.50-4.el8 baseos 63 k
perl-HTTP-Tiny noarch 0.074-1.el8 baseos 58 k
perl-IO x86_64 1.38-420.el8 baseos 141 k
perl-MIME-Base64 x86_64 3.15-396.el8 baseos 30 k
perl-Net-SSLeay x86_64 1.88-1.module_el8.3.0+2086+72f2d257 appstream 378 k
perl-PathTools x86_64 3.74-1.el8 baseos 90 k
perl-Pod-Escapes noarch 1:1.07-395.el8 baseos 20 k
perl-Pod-Perldoc noarch 3.28-396.el8 baseos 86 k
perl-Pod-Simple noarch 1:3.35-395.el8 baseos 213 k
perl-Pod-Usage noarch 4:1.69-395.el8 baseos 34 k
perl-Scalar-List-Utils x86_64 3:1.49-2.el8 baseos 68 k
perl-Socket x86_64 4:2.027-3.el8 baseos 59 k
perl-Storable x86_64 1:3.11-3.el8 baseos 98 k
perl-Term-ANSIColor noarch 4.06-396.el8 baseos 46 k
perl-Term-Cap noarch 1.17-395.el8 baseos 23 k
perl-Text-ParseWords noarch 3.30-395.el8 baseos 18 k
perl-Text-Tabs+Wrap noarch 2013.0523-395.el8 baseos 24 k
perl-Thread-Queue noarch 3.13-1.el8 appstream 24 k
perl-Time-Local noarch 1:1.280-1.el8 baseos 33 k
perl-URI noarch 1.73-3.el8 appstream 116 k
perl-Unicode-Normalize x86_64 1.25-396.el8 baseos 82 k
perl-constant noarch 1.33-396.el8 baseos 25 k
perl-interpreter x86_64 4:5.26.3-420.el8 baseos 6.3 M
perl-libnet noarch 3.11-3.el8 appstream 121 k
perl-libs x86_64 4:5.26.3-420.el8 baseos 1.6 M
perl-macros x86_64 4:5.26.3-420.el8 baseos 71 k
perl-parent noarch 1:0.237-1.el8 baseos 20 k
perl-podlators noarch 4.11-1.el8 baseos 118 k
perl-threads x86_64 1:2.21-2.el8 baseos 61 k
perl-threads-shared x86_64 1.58-2.el8 baseos 47 k
php-process x86_64 8.0.12-1.el8.remi remi-modular 106 k
pkgconf x86_64 1.4.2-1.el8 baseos 38 k
pkgconf-m4 noarch 1.4.2-1.el8 baseos 17 k
pkgconf-pkg-config x86_64 1.4.2-1.el8 baseos 15 k
tar x86_64 2:1.30-5.el8 baseos 837 k
xz-devel x86_64 5.2.4-3.el8 baseos 62 k
zlib-devel x86_64 1.2.11-17.el8 baseos 56 k
弱い依存関係のインストール:
perl-IO-Socket-IP noarch 0.39-5.el8 appstream 47 k
perl-IO-Socket-SSL noarch 2.066-4.module_el8.3.0+2086+72f2d257 appstream 297 k
perl-Mozilla-CA noarch 20160104-7.module_el8.3.0+2091+9eecfe51 appstream 14 k
php-fedora-autoloader noarch 1.0.1-2.el8.remi remi-safe 13 k
php-nikic-php-parser4 noarch 4.13.1-1.el8.remi remi 170 k
モジュールストリームの有効化中:
perl 5.26
perl-IO-Socket-SSL 2.066
perl-libwww-perl 6.34
トランザクションの概要
========================================================================================================================================
インストール 104 パッケージ
アップグレード 17 パッケージ
ダウンロードサイズの合計: 130 M
パッケージのダウンロード:
(1/121): dejavu-fonts-common-2.35-7.el8.noarch.rpm 498 kB/s | 73 kB 00:00
(2/121): emacs-filesystem-26.1-7.el8.noarch.rpm 2.2 MB/s | 69 kB 00:00
(3/121): fontconfig-2.13.1-4.el8.x86_64.rpm 4.0 MB/s | 273 kB 00:00
(4/121): fontpackages-filesystem-1.44-22.el8.noarch.rpm 808 kB/s | 16 kB 00:00
(5/121): glibc-devel-2.28-164.el8.x86_64.rpm 8.5 MB/s | 1.0 MB 00:00
(6/121): glibc-headers-2.28-164.el8.x86_64.rpm 6.2 MB/s | 479 kB 00:00
(7/121): dejavu-sans-fonts-2.35-7.el8.noarch.rpm 2.7 MB/s | 1.5 MB 00:00
(8/121): keyutils-libs-devel-1.5.10-9.el8.x86_64.rpm 2.0 MB/s | 47 kB 00:00
(9/121): krb5-devel-1.18.2-14.el8.x86_64.rpm 5.3 MB/s | 559 kB 00:00
(10/121): libcom_err-devel-1.45.6-2.el8.x86_64.rpm 1.6 MB/s | 37 kB 00:00
(11/121): libkadm5-1.18.2-14.el8.x86_64.rpm 4.1 MB/s | 186 kB 00:00
(12/121): binutils-2.30-108.el8_5.1.x86_64.rpm 6.7 MB/s | 5.8 MB 00:00
(13/121): libpkgconf-1.4.2-1.el8.x86_64.rpm 299 kB/s | 35 kB 00:00
(14/121): libsepol-devel-2.9-3.el8.x86_64.rpm 3.2 MB/s | 86 kB 00:00
(15/121): libselinux-devel-2.9-5.el8.x86_64.rpm 4.9 MB/s | 199 kB 00:00
(16/121): libverto-devel-0.3.0-5.el8.x86_64.rpm 936 kB/s | 18 kB 00:00
(17/121): libxcrypt-devel-4.1.1-6.el8.x86_64.rpm 1.5 MB/s | 24 kB 00:00
(18/121): make-4.2.1-10.el8.x86_64.rpm 7.3 MB/s | 498 kB 00:00
(19/121): m4-1.4.18-7.el8.x86_64.rpm 2.7 MB/s | 222 kB 00:00
(20/121): pcre2-devel-10.32-2.el8.x86_64.rpm 3.5 MB/s | 604 kB 00:00
(21/121): kernel-headers-4.18.0-348.2.1.el8_5.x86_64.rpm 9.5 MB/s | 8.3 MB 00:00
(22/121): openssl-devel-1.1.1k-4.el8.x86_64.rpm 6.1 MB/s | 2.3 MB 00:00
(23/121): pcre2-utf16-10.32-2.el8.x86_64.rpm 1.1 MB/s | 228 kB 00:00
(24/121): pcre2-utf32-10.32-2.el8.x86_64.rpm 3.7 MB/s | 220 kB 00:00
(25/121): perl-Carp-1.42-396.el8.noarch.rpm 1.3 MB/s | 30 kB 00:00
(26/121): perl-Data-Dumper-2.167-399.el8.x86_64.rpm 2.7 MB/s | 58 kB 00:00
(27/121): perl-Errno-1.28-420.el8.x86_64.rpm 3.3 MB/s | 75 kB 00:00
(28/121): perl-Exporter-5.72-396.el8.noarch.rpm 1.9 MB/s | 34 kB 00:00
(29/121): perl-File-Path-2.15-2.el8.noarch.rpm 2.0 MB/s | 38 kB 00:00
(30/121): perl-File-Temp-0.230.600-1.el8.noarch.rpm 2.9 MB/s | 62 kB 00:00
(31/121): perl-Getopt-Long-2.50-4.el8.noarch.rpm 3.2 MB/s | 63 kB 00:00
(32/121): perl-HTTP-Tiny-0.074-1.el8.noarch.rpm 2.7 MB/s | 58 kB 00:00
(33/121): perl-IO-1.38-420.el8.x86_64.rpm 5.0 MB/s | 141 kB 00:00
(34/121): perl-MIME-Base64-3.15-396.el8.x86_64.rpm 1.4 MB/s | 30 kB 00:00
(35/121): perl-Pod-Escapes-1.07-395.el8.noarch.rpm 1.1 MB/s | 20 kB 00:00
(36/121): perl-PathTools-3.74-1.el8.x86_64.rpm 3.1 MB/s | 90 kB 00:00
(37/121): perl-Encode-2.97-3.el8.x86_64.rpm 7.9 MB/s | 1.5 MB 00:00
(38/121): perl-Pod-Perldoc-3.28-396.el8.noarch.rpm 1.2 MB/s | 86 kB 00:00
(39/121): perl-Pod-Simple-3.35-395.el8.noarch.rpm 2.8 MB/s | 213 kB 00:00
(40/121): perl-Pod-Usage-1.69-395.el8.noarch.rpm 1.4 MB/s | 34 kB 00:00
(41/121): perl-Scalar-List-Utils-1.49-2.el8.x86_64.rpm 2.7 MB/s | 68 kB 00:00
(42/121): perl-Socket-2.027-3.el8.x86_64.rpm 2.7 MB/s | 59 kB 00:00
(43/121): perl-Term-ANSIColor-4.06-396.el8.noarch.rpm 2.4 MB/s | 46 kB 00:00
(44/121): perl-Storable-3.11-3.el8.x86_64.rpm 3.7 MB/s | 98 kB 00:00
(45/121): perl-Term-Cap-1.17-395.el8.noarch.rpm 1.1 MB/s | 23 kB 00:00
(46/121): perl-Text-ParseWords-3.30-395.el8.noarch.rpm 725 kB/s | 18 kB 00:00
(47/121): perl-Text-Tabs+Wrap-2013.0523-395.el8.noarch.rpm 1.1 MB/s | 24 kB 00:00
(48/121): perl-Time-Local-1.280-1.el8.noarch.rpm 1.4 MB/s | 33 kB 00:00
(49/121): perl-Unicode-Normalize-1.25-396.el8.x86_64.rpm 4.4 MB/s | 82 kB 00:00
(50/121): perl-constant-1.33-396.el8.noarch.rpm 1.0 MB/s | 25 kB 00:00
(51/121): perl-macros-5.26.3-420.el8.x86_64.rpm 3.0 MB/s | 71 kB 00:00
(52/121): perl-parent-0.237-1.el8.noarch.rpm 1.1 MB/s | 20 kB 00:00
(53/121): perl-podlators-4.11-1.el8.noarch.rpm 3.0 MB/s | 118 kB 00:00
(54/121): perl-threads-2.21-2.el8.x86_64.rpm 3.1 MB/s | 61 kB 00:00
(55/121): perl-threads-shared-1.58-2.el8.x86_64.rpm 2.3 MB/s | 47 kB 00:00
(56/121): pkgconf-1.4.2-1.el8.x86_64.rpm 2.0 MB/s | 38 kB 00:00
(57/121): perl-libs-5.26.3-420.el8.x86_64.rpm 8.9 MB/s | 1.6 MB 00:00
(58/121): pkgconf-m4-1.4.2-1.el8.noarch.rpm 579 kB/s | 17 kB 00:00
(59/121): pkgconf-pkg-config-1.4.2-1.el8.x86_64.rpm 717 kB/s | 15 kB 00:00
(60/121): xz-devel-5.2.4-3.el8.x86_64.rpm 2.8 MB/s | 62 kB 00:00
(61/121): zlib-devel-1.2.11-17.el8.x86_64.rpm 2.8 MB/s | 56 kB 00:00
(62/121): tar-1.30-5.el8.x86_64.rpm 8.6 MB/s | 837 kB 00:00
(63/121): automake-1.16.1-7.el8.noarch.rpm 8.0 MB/s | 712 kB 00:00
(64/121): cmake-filesystem-3.20.2-4.el8.x86_64.rpm 1.0 MB/s | 43 kB 00:00
(65/121): perl-interpreter-5.26.3-420.el8.x86_64.rpm 12 MB/s | 6.3 MB 00:00
(66/121): autoconf-2.69-29.el8.noarch.rpm 2.5 MB/s | 710 kB 00:00
(67/121): cpp-8.5.0-3.el8.alma.x86_64.rpm 9.8 MB/s | 10 MB 00:01
(68/121): gd-2.2.5-7.el8.x86_64.rpm 5.1 MB/s | 143 kB 00:00
(69/121): isl-0.16.1-6.el8.x86_64.rpm 9.1 MB/s | 841 kB 00:00
(70/121): jbigkit-libs-2.1-14.el8.x86_64.rpm 2.2 MB/s | 54 kB 00:00
(71/121): libX11-1.6.8-5.el8.x86_64.rpm 7.8 MB/s | 610 kB 00:00
(72/121): libX11-common-1.6.8-5.el8.noarch.rpm 5.2 MB/s | 157 kB 00:00
(73/121): libXau-1.0.9-3.el8.x86_64.rpm 2.0 MB/s | 37 kB 00:00
(74/121): libXpm-3.5.12-8.el8.x86_64.rpm 2.6 MB/s | 58 kB 00:00
(75/121): libjpeg-turbo-1.5.3-12.el8.x86_64.rpm 5.9 MB/s | 156 kB 00:00
(76/121): libmpc-1.1.0-9.1.el8.x86_64.rpm 1.4 MB/s | 60 kB 00:00
(77/121): libstdc++-devel-8.5.0-3.el8.alma.x86_64.rpm 11 MB/s | 2.0 MB 00:00
(78/121): gcc-8.5.0-3.el8.alma.x86_64.rpm 12 MB/s | 23 MB 00:01
(79/121): libtiff-4.0.9-20.el8.x86_64.rpm 496 kB/s | 187 kB 00:00
(80/121): libwebp-1.0.0-5.el8.x86_64.rpm 4.6 MB/s | 271 kB 00:00
(81/121): libtool-2.4.6-25.el8.x86_64.rpm 8.2 MB/s | 708 kB 00:00
(82/121): libxcb-1.13.1-1.el8.x86_64.rpm 5.6 MB/s | 231 kB 00:00
(83/121): perl-Digest-1.17-395.el8.noarch.rpm 1.3 MB/s | 27 kB 00:00
(84/121): perl-Digest-MD5-2.55-396.el8.x86_64.rpm 1.5 MB/s | 37 kB 00:00
(85/121): perl-IO-Socket-IP-0.39-5.el8.noarch.rpm 2.1 MB/s | 47 kB 00:00
(86/121): libxml2-devel-2.9.7-9.el8_4.2.x86_64.rpm 7.3 MB/s | 1.0 MB 00:00
(87/121): perl-IO-Socket-SSL-2.066-4.module_el8.3.0+2086+72f2d257.noarch.rpm 5.5 MB/s | 297 kB 00:00
(88/121): perl-Mozilla-CA-20160104-7.module_el8.3.0+2091+9eecfe51.noarch.rpm 736 kB/s | 14 kB 00:00
(89/121): perl-Net-SSLeay-1.88-1.module_el8.3.0+2086+72f2d257.x86_64.rpm 7.5 MB/s | 378 kB 00:00
(90/121): perl-Thread-Queue-3.13-1.el8.noarch.rpm 573 kB/s | 24 kB 00:00
(91/121): perl-URI-1.73-3.el8.noarch.rpm 5.4 MB/s | 116 kB 00:00
(92/121): perl-libnet-3.11-3.el8.noarch.rpm 4.5 MB/s | 121 kB 00:00
(93/121): gcc-c++-8.5.0-3.el8.alma.x86_64.rpm 4.5 MB/s | 12 MB 00:02
(94/121): php-gd-8.0.12-1.el8.remi.x86_64.rpm 54 kB/s | 102 kB 00:01
(95/121): php-mysqlnd-8.0.12-1.el8.remi.x86_64.rpm 158 kB/s | 262 kB 00:01
(96/121): php-opcache-8.0.12-1.el8.remi.x86_64.rpm 891 kB/s | 768 kB 00:00
(97/121): php-devel-8.0.12-1.el8.remi.x86_64.rpm 415 kB/s | 1.2 MB 00:03
(98/121): php-pear-1.10.13-1.el8.remi.noarch.rpm 1.2 MB/s | 366 kB 00:00
(99/121): php-pecl-mysql-1.0.0-0.24.20201210.6ca4fa4.el8.remi.8.0.x86_64.rpm 158 kB/s | 43 kB 00:00
(100/121): php-pecl-xdebug3-3.1.1-1.el8.remi.8.0.x86_64.rpm 998 kB/s | 283 kB 00:00
(101/121): php-process-8.0.12-1.el8.remi.x86_64.rpm 387 kB/s | 106 kB 00:00
(102/121): php-fedora-autoloader-1.0.1-2.el8.remi.noarch.rpm 49 kB/s | 13 kB 00:00
(103/121): e2fsprogs-1.45.6-2.el8.x86_64.rpm 5.0 MB/s | 1.0 MB 00:00
(104/121): e2fsprogs-libs-1.45.6-2.el8.x86_64.rpm 5.4 MB/s | 232 kB 00:00
(105/121): glibc-2.28-164.el8.x86_64.rpm 7.0 MB/s | 3.6 MB 00:00
(106/121): php-nikic-php-parser4-4.13.1-1.el8.remi.noarch.rpm 89 kB/s | 170 kB 00:01
(107/121): php-pdo-8.0.12-1.el8.remi.x86_64.rpm 46 kB/s | 156 kB 00:03
(108/121): keyutils-libs-1.5.10-9.el8.x86_64.rpm 573 kB/s | 33 kB 00:00
(109/121): glibc-common-2.28-164.el8.x86_64.rpm 6.3 MB/s | 1.3 MB 00:00
(110/121): libcom_err-1.45.6-2.el8.x86_64.rpm 1.7 MB/s | 48 kB 00:00
(111/121): libgcc-8.5.0-3.el8.alma.x86_64.rpm 3.7 MB/s | 78 kB 00:00
(112/121): krb5-libs-1.18.2-14.el8.x86_64.rpm 6.6 MB/s | 839 kB 00:00
(113/121): libgomp-8.5.0-3.el8.alma.x86_64.rpm 4.4 MB/s | 205 kB 00:00
(114/121): libss-1.45.6-2.el8.x86_64.rpm 2.3 MB/s | 52 kB 00:00
(115/121): libsepol-2.9-3.el8.x86_64.rpm 7.0 MB/s | 339 kB 00:00
(116/121): libxcrypt-4.1.1-6.el8.x86_64.rpm 3.3 MB/s | 72 kB 00:00
(117/121): libstdc++-8.5.0-3.el8.alma.x86_64.rpm 8.5 MB/s | 452 kB 00:00
(118/121): libxml2-2.9.7-9.el8_4.2.x86_64.rpm 9.7 MB/s | 695 kB 00:00
(119/121): openssl-1.1.1k-4.el8.x86_64.rpm 8.9 MB/s | 707 kB 00:00
(120/121): openssl-libs-1.1.1k-4.el8.x86_64.rpm 13 MB/s | 1.5 MB 00:00
(121/121): glibc-all-langpacks-2.28-164.el8.x86_64.rpm 9.4 MB/s | 25 MB 00:02
----------------------------------------------------------------------------------------------------------------------------------------
合計 7.5 MB/s | 130 MB 00:17
トランザクションの確認を実行中
トランザクションの確認に成功しました。
トランザクションのテストを実行中
トランザクションのテストに成功しました。
トランザクションを実行中
準備 : 1/1
アップグレード中 : glibc-all-langpacks-2.28-164.el8.x86_64 1/138
アップグレード中 : glibc-common-2.28-164.el8.x86_64 2/138
scriptletの実行中: glibc-2.28-164.el8.x86_64 3/138
アップグレード中 : glibc-2.28-164.el8.x86_64 3/138
scriptletの実行中: glibc-2.28-164.el8.x86_64 3/138
アップグレード中 : libcom_err-1.45.6-2.el8.x86_64 4/138
scriptletの実行中: libcom_err-1.45.6-2.el8.x86_64 4/138
アップグレード中 : openssl-libs-1:1.1.1k-4.el8.x86_64 5/138
scriptletの実行中: openssl-libs-1:1.1.1k-4.el8.x86_64 5/138
アップグレード中 : libgcc-8.5.0-3.el8.alma.x86_64 6/138
scriptletの実行中: libgcc-8.5.0-3.el8.alma.x86_64 6/138
アップグレード中 : libstdc++-8.5.0-3.el8.alma.x86_64 7/138
scriptletの実行中: libstdc++-8.5.0-3.el8.alma.x86_64 7/138
アップグレード中 : keyutils-libs-1.5.10-9.el8.x86_64 8/138
インストール中 : libmpc-1.1.0-9.1.el8.x86_64 9/138
アップグレード中 : libxcrypt-4.1.1-6.el8.x86_64 10/138
アップグレード中 : krb5-libs-1.18.2-14.el8.x86_64 11/138
インストール中 : libjpeg-turbo-1.5.3-12.el8.x86_64 12/138
インストール中 : php-fedora-autoloader-1.0.1-2.el8.remi.noarch 13/138
インストール中 : fontpackages-filesystem-1.44-22.el8.noarch 14/138
インストール中 : dejavu-fonts-common-2.35-7.el8.noarch 15/138
インストール中 : dejavu-sans-fonts-2.35-7.el8.noarch 16/138
インストール中 : fontconfig-2.13.1-4.el8.x86_64 17/138
scriptletの実行中: fontconfig-2.13.1-4.el8.x86_64 17/138
インストール中 : php-nikic-php-parser4-4.13.1-1.el8.remi.noarch 18/138
インストール中 : libkadm5-1.18.2-14.el8.x86_64 19/138
インストール中 : cpp-8.5.0-3.el8.alma.x86_64 20/138
scriptletの実行中: cpp-8.5.0-3.el8.alma.x86_64 20/138
インストール中 : keyutils-libs-devel-1.5.10-9.el8.x86_64 21/138
インストール中 : binutils-2.30-108.el8_5.1.x86_64 22/138
scriptletの実行中: binutils-2.30-108.el8_5.1.x86_64 22/138
インストール中 : libstdc++-devel-8.5.0-3.el8.alma.x86_64 23/138
アップグレード中 : openssl-1:1.1.1k-4.el8.x86_64 24/138
インストール中 : perl-Digest-1.17-395.el8.noarch 25/138
インストール中 : perl-Digest-MD5-2.55-396.el8.x86_64 26/138
インストール中 : perl-Data-Dumper-2.167-399.el8.x86_64 27/138
インストール中 : perl-libnet-3.11-3.el8.noarch 28/138
インストール中 : perl-Net-SSLeay-1.88-1.module_el8.3.0+2086+72f2d257.x86_64 29/138
インストール中 : perl-URI-1.73-3.el8.noarch 30/138
インストール中 : perl-Pod-Escapes-1:1.07-395.el8.noarch 31/138
インストール中 : perl-Time-Local-1:1.280-1.el8.noarch 32/138
インストール中 : perl-IO-Socket-IP-0.39-5.el8.noarch 33/138
インストール中 : perl-Mozilla-CA-20160104-7.module_el8.3.0+2091+9eecfe51.noarch 34/138
インストール中 : perl-IO-Socket-SSL-2.066-4.module_el8.3.0+2086+72f2d257.noarch 35/138
インストール中 : perl-Term-ANSIColor-4.06-396.el8.noarch 36/138
インストール中 : perl-Term-Cap-1.17-395.el8.noarch 37/138
インストール中 : perl-File-Temp-0.230.600-1.el8.noarch 38/138
インストール中 : perl-Pod-Simple-1:3.35-395.el8.noarch 39/138
インストール中 : perl-HTTP-Tiny-0.074-1.el8.noarch 40/138
インストール中 : perl-podlators-4.11-1.el8.noarch 41/138
インストール中 : perl-Pod-Perldoc-3.28-396.el8.noarch 42/138
インストール中 : perl-Text-ParseWords-3.30-395.el8.noarch 43/138
インストール中 : perl-Pod-Usage-4:1.69-395.el8.noarch 44/138
インストール中 : perl-MIME-Base64-3.15-396.el8.x86_64 45/138
インストール中 : perl-Storable-1:3.11-3.el8.x86_64 46/138
インストール中 : perl-Getopt-Long-1:2.50-4.el8.noarch 47/138
インストール中 : perl-Errno-1.28-420.el8.x86_64 48/138
インストール中 : perl-Socket-4:2.027-3.el8.x86_64 49/138
インストール中 : perl-Encode-4:2.97-3.el8.x86_64 50/138
インストール中 : perl-Exporter-5.72-396.el8.noarch 51/138
インストール中 : perl-Scalar-List-Utils-3:1.49-2.el8.x86_64 52/138
インストール中 : perl-macros-4:5.26.3-420.el8.x86_64 53/138
インストール中 : perl-parent-1:0.237-1.el8.noarch 54/138
インストール中 : perl-Text-Tabs+Wrap-2013.0523-395.el8.noarch 55/138
インストール中 : perl-Unicode-Normalize-1.25-396.el8.x86_64 56/138
インストール中 : perl-File-Path-2.15-2.el8.noarch 57/138
インストール中 : perl-IO-1.38-420.el8.x86_64 58/138
インストール中 : perl-PathTools-3.74-1.el8.x86_64 59/138
インストール中 : perl-constant-1.33-396.el8.noarch 60/138
インストール中 : perl-threads-1:2.21-2.el8.x86_64 61/138
インストール中 : perl-threads-shared-1.58-2.el8.x86_64 62/138
インストール中 : perl-libs-4:5.26.3-420.el8.x86_64 63/138
インストール中 : perl-Carp-1.42-396.el8.noarch 64/138
インストール中 : perl-interpreter-4:5.26.3-420.el8.x86_64 65/138
インストール中 : perl-Thread-Queue-3.13-1.el8.noarch 66/138
アップグレード中 : e2fsprogs-libs-1.45.6-2.el8.x86_64 67/138
scriptletの実行中: e2fsprogs-libs-1.45.6-2.el8.x86_64 67/138
アップグレード中 : libss-1.45.6-2.el8.x86_64 68/138
scriptletの実行中: libss-1.45.6-2.el8.x86_64 68/138
インストール中 : libpkgconf-1.4.2-1.el8.x86_64 69/138
インストール中 : pkgconf-1.4.2-1.el8.x86_64 70/138
インストール中 : m4-1.4.18-7.el8.x86_64 71/138
scriptletの実行中: m4-1.4.18-7.el8.x86_64 71/138
インストール中 : make-1:4.2.1-10.el8.x86_64 72/138
scriptletの実行中: make-1:4.2.1-10.el8.x86_64 72/138
インストール中 : pcre2-utf16-10.32-2.el8.x86_64 73/138
インストール中 : pcre2-utf32-10.32-2.el8.x86_64 74/138
インストール中 : tar-2:1.30-5.el8.x86_64 75/138
scriptletの実行中: tar-2:1.30-5.el8.x86_64 75/138
インストール中 : isl-0.16.1-6.el8.x86_64 76/138
scriptletの実行中: isl-0.16.1-6.el8.x86_64 76/138
インストール中 : jbigkit-libs-2.1-14.el8.x86_64 77/138
scriptletの実行中: jbigkit-libs-2.1-14.el8.x86_64 77/138
インストール中 : libtiff-4.0.9-20.el8.x86_64 78/138
インストール中 : libXau-1.0.9-3.el8.x86_64 79/138
インストール中 : libxcb-1.13.1-1.el8.x86_64 80/138
インストール中 : libwebp-1.0.0-5.el8.x86_64 81/138
インストール中 : php-pdo-8.0.12-1.el8.remi.x86_64 82/138
インストール中 : php-mysqlnd-8.0.12-1.el8.remi.x86_64 83/138
インストール中 : php-process-8.0.12-1.el8.remi.x86_64 84/138
アップグレード中 : libgomp-8.5.0-3.el8.alma.x86_64 85/138
scriptletの実行中: libgomp-8.5.0-3.el8.alma.x86_64 85/138
アップグレード中 : libsepol-2.9-3.el8.x86_64 86/138
scriptletの実行中: libsepol-2.9-3.el8.x86_64 86/138
アップグレード中 : libxml2-2.9.7-9.el8_4.2.x86_64 87/138
インストール中 : libX11-common-1.6.8-5.el8.noarch 88/138
インストール中 : libX11-1.6.8-5.el8.x86_64 89/138
インストール中 : libXpm-3.5.12-8.el8.x86_64 90/138
インストール中 : gd-2.2.5-7.el8.x86_64 91/138
scriptletの実行中: gd-2.2.5-7.el8.x86_64 91/138
インストール中 : cmake-filesystem-3.20.2-4.el8.x86_64 92/138
インストール中 : pkgconf-m4-1.4.2-1.el8.noarch 93/138
インストール中 : pkgconf-pkg-config-1.4.2-1.el8.x86_64 94/138
インストール中 : zlib-devel-1.2.11-17.el8.x86_64 95/138
インストール中 : pcre2-devel-10.32-2.el8.x86_64 96/138
インストール中 : libcom_err-devel-1.45.6-2.el8.x86_64 97/138
インストール中 : libsepol-devel-2.9-3.el8.x86_64 98/138
インストール中 : libselinux-devel-2.9-5.el8.x86_64 99/138
インストール中 : libverto-devel-0.3.0-5.el8.x86_64 100/138
インストール中 : krb5-devel-1.18.2-14.el8.x86_64 101/138
インストール中 : openssl-devel-1:1.1.1k-4.el8.x86_64 102/138
インストール中 : xz-devel-5.2.4-3.el8.x86_64 103/138
インストール中 : libxml2-devel-2.9.7-9.el8_4.2.x86_64 104/138
インストール中 : kernel-headers-4.18.0-348.2.1.el8_5.x86_64 105/138
scriptletの実行中: glibc-headers-2.28-164.el8.x86_64 106/138
インストール中 : glibc-headers-2.28-164.el8.x86_64 106/138
インストール中 : libxcrypt-devel-4.1.1-6.el8.x86_64 107/138
インストール中 : glibc-devel-2.28-164.el8.x86_64 108/138
scriptletの実行中: glibc-devel-2.28-164.el8.x86_64 108/138
インストール中 : gcc-8.5.0-3.el8.alma.x86_64 109/138
scriptletの実行中: gcc-8.5.0-3.el8.alma.x86_64 109/138
インストール中 : gcc-c++-8.5.0-3.el8.alma.x86_64 110/138
インストール中 : emacs-filesystem-1:26.1-7.el8.noarch 111/138
インストール中 : autoconf-2.69-29.el8.noarch 112/138
scriptletの実行中: autoconf-2.69-29.el8.noarch 112/138
インストール中 : automake-1.16.1-7.el8.noarch 113/138
インストール中 : libtool-2.4.6-25.el8.x86_64 114/138
scriptletの実行中: libtool-2.4.6-25.el8.x86_64 114/138
インストール中 : php-devel-8.0.12-1.el8.remi.x86_64 115/138
インストール中 : php-gd-8.0.12-1.el8.remi.x86_64 116/138
インストール中 : php-pear-1:1.10.13-1.el8.remi.noarch 117/138
インストール中 : php-pecl-mysql-1.0.0-0.24.20201210.6ca4fa4.el8.remi.8.0.x86_64 118/138
アップグレード中 : e2fsprogs-1.45.6-2.el8.x86_64 119/138
インストール中 : php-opcache-8.0.12-1.el8.remi.x86_64 120/138
インストール中 : php-pecl-xdebug3-3.1.1-1.el8.remi.8.0.x86_64 121/138
整理 : krb5-libs-1.18.2-8.el8.x86_64 122/138
整理 : libstdc++-8.4.1-1.el8.alma.x86_64 123/138
scriptletの実行中: libstdc++-8.4.1-1.el8.alma.x86_64 123/138
整理 : e2fsprogs-1.45.6-1.el8.x86_64 124/138
整理 : openssl-1:1.1.1g-15.el8_3.x86_64 125/138
整理 : openssl-libs-1:1.1.1g-15.el8_3.x86_64 126/138
scriptletの実行中: openssl-libs-1:1.1.1g-15.el8_3.x86_64 126/138
整理 : e2fsprogs-libs-1.45.6-1.el8.x86_64 127/138
scriptletの実行中: e2fsprogs-libs-1.45.6-1.el8.x86_64 127/138
整理 : libxml2-2.9.7-9.el8.x86_64 128/138
scriptletの実行中: libgomp-8.4.1-1.el8.alma.x86_64 129/138
整理 : libgomp-8.4.1-1.el8.alma.x86_64 129/138
scriptletの実行中: libgomp-8.4.1-1.el8.alma.x86_64 129/138
整理 : libss-1.45.6-1.el8.x86_64 130/138
scriptletの実行中: libss-1.45.6-1.el8.x86_64 130/138
整理 : libcom_err-1.45.6-1.el8.x86_64 131/138
scriptletの実行中: libcom_err-1.45.6-1.el8.x86_64 131/138
整理 : libsepol-2.9-2.el8.x86_64 132/138
scriptletの実行中: libsepol-2.9-2.el8.x86_64 132/138
整理 : keyutils-libs-1.5.10-6.el8.x86_64 133/138
整理 : libxcrypt-4.1.1-4.el8.x86_64 134/138
整理 : glibc-common-2.28-151.el8.x86_64 135/138
整理 : glibc-2.28-151.el8.x86_64 136/138
整理 : glibc-all-langpacks-2.28-151.el8.x86_64 137/138
scriptletの実行中: glibc-all-langpacks-2.28-151.el8.x86_64 137/138
整理 : libgcc-8.4.1-1.el8.alma.x86_64 138/138
scriptletの実行中: libgcc-8.4.1-1.el8.alma.x86_64 138/138
scriptletの実行中: glibc-all-langpacks-2.28-164.el8.x86_64 138/138
scriptletの実行中: libgcc-8.4.1-1.el8.alma.x86_64 138/138
scriptletの実行中: glibc-common-2.28-164.el8.x86_64 138/138
scriptletの実行中: fontconfig-2.13.1-4.el8.x86_64 138/138
scriptletの実行中: php-pear-1:1.10.13-1.el8.remi.noarch 138/138
検証 : binutils-2.30-108.el8_5.1.x86_64 1/138
検証 : dejavu-fonts-common-2.35-7.el8.noarch 2/138
検証 : dejavu-sans-fonts-2.35-7.el8.noarch 3/138
検証 : emacs-filesystem-1:26.1-7.el8.noarch 4/138
検証 : fontconfig-2.13.1-4.el8.x86_64 5/138
検証 : fontpackages-filesystem-1.44-22.el8.noarch 6/138
検証 : glibc-devel-2.28-164.el8.x86_64 7/138
検証 : glibc-headers-2.28-164.el8.x86_64 8/138
検証 : kernel-headers-4.18.0-348.2.1.el8_5.x86_64 9/138
検証 : keyutils-libs-devel-1.5.10-9.el8.x86_64 10/138
検証 : krb5-devel-1.18.2-14.el8.x86_64 11/138
検証 : libcom_err-devel-1.45.6-2.el8.x86_64 12/138
検証 : libkadm5-1.18.2-14.el8.x86_64 13/138
検証 : libpkgconf-1.4.2-1.el8.x86_64 14/138
検証 : libselinux-devel-2.9-5.el8.x86_64 15/138
検証 : libsepol-devel-2.9-3.el8.x86_64 16/138
検証 : libverto-devel-0.3.0-5.el8.x86_64 17/138
検証 : libxcrypt-devel-4.1.1-6.el8.x86_64 18/138
検証 : m4-1.4.18-7.el8.x86_64 19/138
検証 : make-1:4.2.1-10.el8.x86_64 20/138
検証 : openssl-devel-1:1.1.1k-4.el8.x86_64 21/138
検証 : pcre2-devel-10.32-2.el8.x86_64 22/138
検証 : pcre2-utf16-10.32-2.el8.x86_64 23/138
検証 : pcre2-utf32-10.32-2.el8.x86_64 24/138
検証 : perl-Carp-1.42-396.el8.noarch 25/138
検証 : perl-Data-Dumper-2.167-399.el8.x86_64 26/138
検証 : perl-Encode-4:2.97-3.el8.x86_64 27/138
検証 : perl-Errno-1.28-420.el8.x86_64 28/138
検証 : perl-Exporter-5.72-396.el8.noarch 29/138
検証 : perl-File-Path-2.15-2.el8.noarch 30/138
検証 : perl-File-Temp-0.230.600-1.el8.noarch 31/138
検証 : perl-Getopt-Long-1:2.50-4.el8.noarch 32/138
検証 : perl-HTTP-Tiny-0.074-1.el8.noarch 33/138
検証 : perl-IO-1.38-420.el8.x86_64 34/138
検証 : perl-MIME-Base64-3.15-396.el8.x86_64 35/138
検証 : perl-PathTools-3.74-1.el8.x86_64 36/138
検証 : perl-Pod-Escapes-1:1.07-395.el8.noarch 37/138
検証 : perl-Pod-Perldoc-3.28-396.el8.noarch 38/138
検証 : perl-Pod-Simple-1:3.35-395.el8.noarch 39/138
検証 : perl-Pod-Usage-4:1.69-395.el8.noarch 40/138
検証 : perl-Scalar-List-Utils-3:1.49-2.el8.x86_64 41/138
検証 : perl-Socket-4:2.027-3.el8.x86_64 42/138
検証 : perl-Storable-1:3.11-3.el8.x86_64 43/138
検証 : perl-Term-ANSIColor-4.06-396.el8.noarch 44/138
検証 : perl-Term-Cap-1.17-395.el8.noarch 45/138
検証 : perl-Text-ParseWords-3.30-395.el8.noarch 46/138
検証 : perl-Text-Tabs+Wrap-2013.0523-395.el8.noarch 47/138
検証 : perl-Time-Local-1:1.280-1.el8.noarch 48/138
検証 : perl-Unicode-Normalize-1.25-396.el8.x86_64 49/138
検証 : perl-constant-1.33-396.el8.noarch 50/138
検証 : perl-interpreter-4:5.26.3-420.el8.x86_64 51/138
検証 : perl-libs-4:5.26.3-420.el8.x86_64 52/138
検証 : perl-macros-4:5.26.3-420.el8.x86_64 53/138
検証 : perl-parent-1:0.237-1.el8.noarch 54/138
検証 : perl-podlators-4.11-1.el8.noarch 55/138
検証 : perl-threads-1:2.21-2.el8.x86_64 56/138
検証 : perl-threads-shared-1.58-2.el8.x86_64 57/138
検証 : pkgconf-1.4.2-1.el8.x86_64 58/138
検証 : pkgconf-m4-1.4.2-1.el8.noarch 59/138
検証 : pkgconf-pkg-config-1.4.2-1.el8.x86_64 60/138
検証 : tar-2:1.30-5.el8.x86_64 61/138
検証 : xz-devel-5.2.4-3.el8.x86_64 62/138
検証 : zlib-devel-1.2.11-17.el8.x86_64 63/138
検証 : autoconf-2.69-29.el8.noarch 64/138
検証 : automake-1.16.1-7.el8.noarch 65/138
検証 : cmake-filesystem-3.20.2-4.el8.x86_64 66/138
検証 : cpp-8.5.0-3.el8.alma.x86_64 67/138
検証 : gcc-8.5.0-3.el8.alma.x86_64 68/138
検証 : gcc-c++-8.5.0-3.el8.alma.x86_64 69/138
検証 : gd-2.2.5-7.el8.x86_64 70/138
検証 : isl-0.16.1-6.el8.x86_64 71/138
検証 : jbigkit-libs-2.1-14.el8.x86_64 72/138
検証 : libX11-1.6.8-5.el8.x86_64 73/138
検証 : libX11-common-1.6.8-5.el8.noarch 74/138
検証 : libXau-1.0.9-3.el8.x86_64 75/138
検証 : libXpm-3.5.12-8.el8.x86_64 76/138
検証 : libjpeg-turbo-1.5.3-12.el8.x86_64 77/138
検証 : libmpc-1.1.0-9.1.el8.x86_64 78/138
検証 : libstdc++-devel-8.5.0-3.el8.alma.x86_64 79/138
検証 : libtiff-4.0.9-20.el8.x86_64 80/138
検証 : libtool-2.4.6-25.el8.x86_64 81/138
検証 : libwebp-1.0.0-5.el8.x86_64 82/138
検証 : libxcb-1.13.1-1.el8.x86_64 83/138
検証 : libxml2-devel-2.9.7-9.el8_4.2.x86_64 84/138
検証 : perl-Digest-1.17-395.el8.noarch 85/138
検証 : perl-Digest-MD5-2.55-396.el8.x86_64 86/138
検証 : perl-IO-Socket-IP-0.39-5.el8.noarch 87/138
検証 : perl-IO-Socket-SSL-2.066-4.module_el8.3.0+2086+72f2d257.noarch 88/138
検証 : perl-Mozilla-CA-20160104-7.module_el8.3.0+2091+9eecfe51.noarch 89/138
検証 : perl-Net-SSLeay-1.88-1.module_el8.3.0+2086+72f2d257.x86_64 90/138
検証 : perl-Thread-Queue-3.13-1.el8.noarch 91/138
検証 : perl-URI-1.73-3.el8.noarch 92/138
検証 : perl-libnet-3.11-3.el8.noarch 93/138
検証 : php-devel-8.0.12-1.el8.remi.x86_64 94/138
検証 : php-gd-8.0.12-1.el8.remi.x86_64 95/138
検証 : php-mysqlnd-8.0.12-1.el8.remi.x86_64 96/138
検証 : php-opcache-8.0.12-1.el8.remi.x86_64 97/138
検証 : php-pdo-8.0.12-1.el8.remi.x86_64 98/138
検証 : php-pear-1:1.10.13-1.el8.remi.noarch 99/138
検証 : php-pecl-mysql-1.0.0-0.24.20201210.6ca4fa4.el8.remi.8.0.x86_64 100/138
検証 : php-pecl-xdebug3-3.1.1-1.el8.remi.8.0.x86_64 101/138
検証 : php-process-8.0.12-1.el8.remi.x86_64 102/138
検証 : php-fedora-autoloader-1.0.1-2.el8.remi.noarch 103/138
検証 : php-nikic-php-parser4-4.13.1-1.el8.remi.noarch 104/138
検証 : e2fsprogs-1.45.6-2.el8.x86_64 105/138
検証 : e2fsprogs-1.45.6-1.el8.x86_64 106/138
検証 : e2fsprogs-libs-1.45.6-2.el8.x86_64 107/138
検証 : e2fsprogs-libs-1.45.6-1.el8.x86_64 108/138
検証 : glibc-2.28-164.el8.x86_64 109/138
検証 : glibc-2.28-151.el8.x86_64 110/138
検証 : glibc-all-langpacks-2.28-164.el8.x86_64 111/138
検証 : glibc-all-langpacks-2.28-151.el8.x86_64 112/138
検証 : glibc-common-2.28-164.el8.x86_64 113/138
検証 : glibc-common-2.28-151.el8.x86_64 114/138
検証 : keyutils-libs-1.5.10-9.el8.x86_64 115/138
検証 : keyutils-libs-1.5.10-6.el8.x86_64 116/138
検証 : krb5-libs-1.18.2-14.el8.x86_64 117/138
検証 : krb5-libs-1.18.2-8.el8.x86_64 118/138
検証 : libcom_err-1.45.6-2.el8.x86_64 119/138
検証 : libcom_err-1.45.6-1.el8.x86_64 120/138
検証 : libgcc-8.5.0-3.el8.alma.x86_64 121/138
検証 : libgcc-8.4.1-1.el8.alma.x86_64 122/138
検証 : libgomp-8.5.0-3.el8.alma.x86_64 123/138
検証 : libgomp-8.4.1-1.el8.alma.x86_64 124/138
検証 : libsepol-2.9-3.el8.x86_64 125/138
検証 : libsepol-2.9-2.el8.x86_64 126/138
検証 : libss-1.45.6-2.el8.x86_64 127/138
検証 : libss-1.45.6-1.el8.x86_64 128/138
検証 : libstdc++-8.5.0-3.el8.alma.x86_64 129/138
検証 : libstdc++-8.4.1-1.el8.alma.x86_64 130/138
検証 : libxcrypt-4.1.1-6.el8.x86_64 131/138
検証 : libxcrypt-4.1.1-4.el8.x86_64 132/138
検証 : libxml2-2.9.7-9.el8_4.2.x86_64 133/138
検証 : libxml2-2.9.7-9.el8.x86_64 134/138
検証 : openssl-1:1.1.1k-4.el8.x86_64 135/138
検証 : openssl-1:1.1.1g-15.el8_3.x86_64 136/138
検証 : openssl-libs-1:1.1.1k-4.el8.x86_64 137/138
検証 : openssl-libs-1:1.1.1g-15.el8_3.x86_64 138/138
アップグレード済み:
e2fsprogs-1.45.6-2.el8.x86_64 e2fsprogs-libs-1.45.6-2.el8.x86_64 glibc-2.28-164.el8.x86_64
glibc-all-langpacks-2.28-164.el8.x86_64 glibc-common-2.28-164.el8.x86_64 keyutils-libs-1.5.10-9.el8.x86_64
krb5-libs-1.18.2-14.el8.x86_64 libcom_err-1.45.6-2.el8.x86_64 libgcc-8.5.0-3.el8.alma.x86_64
libgomp-8.5.0-3.el8.alma.x86_64 libsepol-2.9-3.el8.x86_64 libss-1.45.6-2.el8.x86_64
libstdc++-8.5.0-3.el8.alma.x86_64 libxcrypt-4.1.1-6.el8.x86_64 libxml2-2.9.7-9.el8_4.2.x86_64
openssl-1:1.1.1k-4.el8.x86_64 openssl-libs-1:1.1.1k-4.el8.x86_64
インストール済み:
autoconf-2.69-29.el8.noarch automake-1.16.1-7.el8.noarch
binutils-2.30-108.el8_5.1.x86_64 cmake-filesystem-3.20.2-4.el8.x86_64
cpp-8.5.0-3.el8.alma.x86_64 dejavu-fonts-common-2.35-7.el8.noarch
dejavu-sans-fonts-2.35-7.el8.noarch emacs-filesystem-1:26.1-7.el8.noarch
fontconfig-2.13.1-4.el8.x86_64 fontpackages-filesystem-1.44-22.el8.noarch
gcc-8.5.0-3.el8.alma.x86_64 gcc-c++-8.5.0-3.el8.alma.x86_64
gd-2.2.5-7.el8.x86_64 glibc-devel-2.28-164.el8.x86_64
glibc-headers-2.28-164.el8.x86_64 isl-0.16.1-6.el8.x86_64
jbigkit-libs-2.1-14.el8.x86_64 kernel-headers-4.18.0-348.2.1.el8_5.x86_64
keyutils-libs-devel-1.5.10-9.el8.x86_64 krb5-devel-1.18.2-14.el8.x86_64
libX11-1.6.8-5.el8.x86_64 libX11-common-1.6.8-5.el8.noarch
libXau-1.0.9-3.el8.x86_64 libXpm-3.5.12-8.el8.x86_64
libcom_err-devel-1.45.6-2.el8.x86_64 libjpeg-turbo-1.5.3-12.el8.x86_64
libkadm5-1.18.2-14.el8.x86_64 libmpc-1.1.0-9.1.el8.x86_64
libpkgconf-1.4.2-1.el8.x86_64 libselinux-devel-2.9-5.el8.x86_64
libsepol-devel-2.9-3.el8.x86_64 libstdc++-devel-8.5.0-3.el8.alma.x86_64
libtiff-4.0.9-20.el8.x86_64 libtool-2.4.6-25.el8.x86_64
libverto-devel-0.3.0-5.el8.x86_64 libwebp-1.0.0-5.el8.x86_64
libxcb-1.13.1-1.el8.x86_64 libxcrypt-devel-4.1.1-6.el8.x86_64
libxml2-devel-2.9.7-9.el8_4.2.x86_64 m4-1.4.18-7.el8.x86_64
make-1:4.2.1-10.el8.x86_64 openssl-devel-1:1.1.1k-4.el8.x86_64
pcre2-devel-10.32-2.el8.x86_64 pcre2-utf16-10.32-2.el8.x86_64
pcre2-utf32-10.32-2.el8.x86_64 perl-Carp-1.42-396.el8.noarch
perl-Data-Dumper-2.167-399.el8.x86_64 perl-Digest-1.17-395.el8.noarch
perl-Digest-MD5-2.55-396.el8.x86_64 perl-Encode-4:2.97-3.el8.x86_64
perl-Errno-1.28-420.el8.x86_64 perl-Exporter-5.72-396.el8.noarch
perl-File-Path-2.15-2.el8.noarch perl-File-Temp-0.230.600-1.el8.noarch
perl-Getopt-Long-1:2.50-4.el8.noarch perl-HTTP-Tiny-0.074-1.el8.noarch
perl-IO-1.38-420.el8.x86_64 perl-IO-Socket-IP-0.39-5.el8.noarch
perl-IO-Socket-SSL-2.066-4.module_el8.3.0+2086+72f2d257.noarch perl-MIME-Base64-3.15-396.el8.x86_64
perl-Mozilla-CA-20160104-7.module_el8.3.0+2091+9eecfe51.noarch perl-Net-SSLeay-1.88-1.module_el8.3.0+2086+72f2d257.x86_64
perl-PathTools-3.74-1.el8.x86_64 perl-Pod-Escapes-1:1.07-395.el8.noarch
perl-Pod-Perldoc-3.28-396.el8.noarch perl-Pod-Simple-1:3.35-395.el8.noarch
perl-Pod-Usage-4:1.69-395.el8.noarch perl-Scalar-List-Utils-3:1.49-2.el8.x86_64
perl-Socket-4:2.027-3.el8.x86_64 perl-Storable-1:3.11-3.el8.x86_64
perl-Term-ANSIColor-4.06-396.el8.noarch perl-Term-Cap-1.17-395.el8.noarch
perl-Text-ParseWords-3.30-395.el8.noarch perl-Text-Tabs+Wrap-2013.0523-395.el8.noarch
perl-Thread-Queue-3.13-1.el8.noarch perl-Time-Local-1:1.280-1.el8.noarch
perl-URI-1.73-3.el8.noarch perl-Unicode-Normalize-1.25-396.el8.x86_64
perl-constant-1.33-396.el8.noarch perl-interpreter-4:5.26.3-420.el8.x86_64
perl-libnet-3.11-3.el8.noarch perl-libs-4:5.26.3-420.el8.x86_64
perl-macros-4:5.26.3-420.el8.x86_64 perl-parent-1:0.237-1.el8.noarch
perl-podlators-4.11-1.el8.noarch perl-threads-1:2.21-2.el8.x86_64
perl-threads-shared-1.58-2.el8.x86_64 php-devel-8.0.12-1.el8.remi.x86_64
php-fedora-autoloader-1.0.1-2.el8.remi.noarch php-gd-8.0.12-1.el8.remi.x86_64
php-mysqlnd-8.0.12-1.el8.remi.x86_64 php-nikic-php-parser4-4.13.1-1.el8.remi.noarch
php-opcache-8.0.12-1.el8.remi.x86_64 php-pdo-8.0.12-1.el8.remi.x86_64
php-pear-1:1.10.13-1.el8.remi.noarch php-pecl-mysql-1.0.0-0.24.20201210.6ca4fa4.el8.remi.8.0.x86_64
php-pecl-xdebug3-3.1.1-1.el8.remi.8.0.x86_64 php-process-8.0.12-1.el8.remi.x86_64
pkgconf-1.4.2-1.el8.x86_64 pkgconf-m4-1.4.2-1.el8.noarch
pkgconf-pkg-config-1.4.2-1.el8.x86_64 tar-2:1.30-5.el8.x86_64
xz-devel-5.2.4-3.el8.x86_64 zlib-devel-1.2.11-17.el8.x86_64
完了しました!
[root@localhost ~]#
PHPの基本的な設定
PHPの場合、この状態でも動作しますが、基本的な設定を行うことをお勧めします。
本稿では運用するにあたって最低限、必要になる設定を行います。設定の前提は以下の通りです。
- 最低限のセキュリティ設定
- アップロードサイズの変更（2Mから20MBへ）
- タイムゾーンの設定
- マルチバイト対応（日本語対応）
PHP.iniの設定
php.iniの場所を確認します。
php -i | grep php.ini コマンドで確認します。
[root@localhost ~]# php -i | grep php.ini
Configuration File (php.ini) Path => /etc
Loaded Configuration File => /etc/php.ini
[root@localhost ~]#
PHPの設定は/etc/以下にあるphp.iniファイルで行います。
php.iniの設定変更前に、既存のファイルをバックアップしておきます。
cp -p /etc/php.ini /etc/php.ini.org コマンドでコピーします。
[root@localhost ~]# cp -p /etc/php.ini /etc/php.ini.org
[root@localhost ~]#
バックアップの完了後、エディタで設定ファイルを開いて変更を行います。
本稿ではOSの標準的なエディタである、viエディタを利用しています。
vi /etc/php.ini コマンドで開きます。
PHPのセキュリティ設定
PHPはデフォルトの設定ではhttpヘッダーにバージョンを表示します。
バージョンは公開しないほうがセキュアになりますので、phpのバージョンを非表示にする設定を行います。
400行目を変更。
expose_php = On → expose_php = Off
アップロードサイズの変更
PHPのデフォルト設定ではアップロードできるファイルのサイズが2MBだと少ないため、20Mに変更します。
POST データの最大サイズを設定するpost_max_sizeを変更します。デフォルトでは8Mですが、これを20Mに変更します。
703行目を変更。
post_max_size = 8M → post_max_size = 20M
post_max_sizeの変更だけでは、ファイルのアップロード容量を増やせないため、併せてupload_max_filesizeを変更します。
855行目を変更。
upload_max_filesize = 2M → upload_max_filesize = 20M
タイムゾーンの設定
タイムゾーンの設定を行います。
アプリケーションが時間を扱う時にも運用環境に合わせて設定が行われていないと問題になります。
日本の場合は”Asia/Tokyo”になりますので、これをdate.timezoneとして設定を行います。
932行目のコメントアウトを外して変更。
;date.timezone = → date.timezone = “Asia/Tokyo”
マルチバイト対応（日本語対応）設定
以下の項目は日本語を利用するうえでの設定変更になります。
一般的な設定を紹介していますが、日本語の扱いは運用環境によって異なると思います。
動作するアプリケーションに応じて、適宜、変更してください。
まずはmbstringで使用される言語のデフォルト値を定義するmbstring.languageを設定します。
1504行目のコメントアウトを外す。
;mbstring.language = Japanese → mbstring.language = Japanese
続いて内部文字エンコーディングのデフォルト値を定義するmbstring.internal_encodingを設定します。
1511行目のコメントアウトを外しUTF-8を記載。
;mbstring.internal_encoding = → mbstring.internal_encoding = UTF-8
HTTP通信の時のインプット文字コードを指定するmbstring.http_inputを設定します。
1519行目のコメントアウトを外しUTF-8を記載。
;mbstring.http_input = → mbstring.http_input = UTF-8
HTTP 出力文字コードを指定するmbstring.http_outputを設定します。
passを指定して自動変換を行わないようにします。
1529行目のコメントアウトを外しpassを記載。
;mbstring.http_output = → mbstring.http_output = pass
HTTP 入力変換を有効にするmbstring.encoding_translationをOnにします。
文字化けが発生した場合はOffにします。
1537行目のコメントアウトを外しOnに変更。
;mbstring.encoding_translation = Off → mbstring.encoding_translation = On
文字コード自動検出の優先順位を定義するパラメーターであるmbstring.detect_orderを設定します。
autoの場合、UTF-8が最初に選択されるため、ここはautoで問題ないかと思います。
1542行目のコメントアウトを外す。
;mbstring.detect_order = auto → mbstring.detect_order = auto
コードとして変換できない文字がある場合に、代替の文字を出力しないようmbstring.substitute_characterを設定します。
1547行目のコメントアウトを外す。
;mbstring.substitute_character = none → mbstring.substitute_character = none
以上でphp.iniの設定変更は完了です。
実際に変更したphp.ini
実際のINIを下記のダウンロードで来ます。
[PHP]
;;;;;;;;;;;;;;;;;;;
; About php.ini ;
;;;;;;;;;;;;;;;;;;;
; PHP's initialization file, generally called php.ini, is responsible for
; configuring many of the aspects of PHP's behavior.
; PHP attempts to find and load this configuration from a number of locations.
; The following is a summary of its search order:
; 1. SAPI module specific location.
; 2. The PHPRC environment variable. (As of PHP 5.2.0)
; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
; 4. Current working directory (except CLI)
; 5. The web server's directory (for SAPI modules), or directory of PHP
; (otherwise in Windows)
; 6. The directory from the --with-config-file-path compile time option, or the
; Windows directory (usually C:\windows)
; See the PHP docs for more specific information.
; http://php.net/configuration.file
; The syntax of the file is extremely simple. Whitespace and lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
; Directives following the section heading [PATH=/www/mysite] only
; apply to PHP files in the /www/mysite directory. Directives
; following the section heading [HOST=www.example.com] only apply to
; PHP files served from www.example.com. Directives set in these
; special sections cannot be overridden by user-defined INI files or
; at runtime. Currently, [PATH=] and [HOST=] sections only work under
; CGI/FastCGI.
; http://php.net/ini.sections
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
; Directives are variables used to configure PHP or PHP extensions.
; There is no name validation. If PHP can't find an expected
; directive because it is not set or is mistyped, a default value will be used.
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
; previously set variable or directive (e.g. ${foo})
; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; ^ bitwise XOR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
; foo = ; sets foo to an empty string
; foo = None ; sets foo to an empty string
; foo = "None" ; sets foo to the string 'None'
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; PHP comes packaged with two INI files. One that is recommended to be used
; in production environments and one that is recommended to be used in
; development environments.
; php.ini-production contains settings which hold security, performance and
; best practices at its core. But please be aware, these settings may break
; compatibility with older or less security conscience applications. We
; recommending using the production ini in production and testing environments.
; php.ini-development is very similar to its production variant, except it is
; much more verbose when it comes to errors. We recommend using the
; development version only in development environments, as errors shown to
; application users can inadvertently leak otherwise secure information.
; This is the php.ini-production INI file.
;;;;;;;;;;;;;;;;;;;
; Quick Reference ;
;;;;;;;;;;;;;;;;;;;
; The following are all the settings which are different in either the production
; or development versions of the INIs with respect to PHP's default behavior.
; Please see the actual settings later in the document for more details as to why
; we recommend these changes in PHP's behavior.
; display_errors
; Default Value: On
; Development Value: On
; Production Value: Off
; display_startup_errors
; Default Value: On
; Development Value: On
; Production Value: Off
; error_reporting
; Default Value: E_ALL
; Development Value: E_ALL
; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
; log_errors
; Default Value: Off
; Development Value: On
; Production Value: On
; max_input_time
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)
; output_buffering
; Default Value: Off
; Development Value: 4096
; Production Value: 4096
; register_argc_argv
; Default Value: On
; Development Value: Off
; Production Value: Off
; request_order
; Default Value: None
; Development Value: "GP"
; Production Value: "GP"
; session.gc_divisor
; Default Value: 100
; Development Value: 1000
; Production Value: 1000
; session.sid_bits_per_character
; Default Value: 4
; Development Value: 5
; Production Value: 5
; short_open_tag
; Default Value: On
; Development Value: Off
; Production Value: Off
; variables_order
; Default Value: "EGPCS"
; Development Value: "GPCS"
; Production Value: "GPCS"
; zend.exception_ignore_args
; Default Value: Off
; Development Value: Off
; Production Value: On
; zend.exception_string_param_max_len
; Default Value: 15
; Development Value: 15
; Production Value: 0
;;;;;;;;;;;;;;;;;;;;
; php.ini Options ;
;;;;;;;;;;;;;;;;;;;;
; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
;user_ini.filename = ".user.ini"
; To disable this feature set this option to an empty value
;user_ini.filename =
; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
;user_ini.cache_ttl = 300
;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;
; Enable the PHP scripting language engine under Apache.
; http://php.net/engine
engine = On
; This directive determines whether or not PHP will recognize code between
; <? and ?> tags as PHP source which should be processed as such. It is
; generally recommended that <?php and ?> should be used and that this feature
; should be disabled, as enabling it may result in issues when generating XML
; documents, however this remains supported for backward compatibility reasons.
; Note that this directive does not control the <?= shorthand tag, which can be
; used regardless of this directive.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/short-open-tag
short_open_tag = Off
; The number of significant digits displayed in floating point numbers.
; http://php.net/precision
precision = 14
; Output buffering is a mechanism for controlling how much output data
; (excluding headers and cookies) PHP should keep internally before pushing that
; data to the client. If your application's output exceeds this setting, PHP
; will send that data in chunks of roughly the size you specify.
; Turning on this setting and managing its maximum buffer size can yield some
; interesting side-effects depending on your application and web server.
; You may be able to send headers and cookies after you've already sent output
; through print or echo. You also may see performance benefits if your server is
; emitting less packets due to buffered output versus PHP streaming the output
; as it gets it. On production servers, 4096 bytes is a good setting for performance
; reasons.
; Note: Output buffering can also be controlled via Output Buffering Control
; functions.
; Possible Values:
; On = Enabled and buffer is unlimited. (Use with caution)
; Off = Disabled
; Integer = Enables the buffer and sets its maximum size in bytes.
; Note: This directive is hardcoded to Off for the CLI SAPI
; Default Value: Off
; Development Value: 4096
; Production Value: 4096
; http://php.net/output-buffering
output_buffering = 4096
; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using ob_start().
; Using this ini directive may cause problems unless you know what script
; is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
; Instead you must use zlib.output_handler.
; http://php.net/output-handler
;output_handler =
; URL rewriter function rewrites URL on the fly by using
; output buffer. You can set target tags by this configuration.
; "form" tag is special tag. It will add hidden input tag to pass values.
; Refer to session.trans_sid_tags for usage.
; Default Value: "form="
; Development Value: "form="
; Production Value: "form="
;url_rewriter.tags
; URL rewriter will not rewrite absolute URL nor form by default. To enable
; absolute URL rewrite, allowed hosts must be defined at RUNTIME.
; Refer to session.trans_sid_hosts for more details.
; Default Value: ""
; Development Value: ""
; Production Value: ""
;url_rewriter.hosts
; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
; http://php.net/zlib.output-compression
zlib.output_compression = Off
; http://php.net/zlib.output-compression-level
;zlib.output_compression_level = -1
; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
; http://php.net/zlib.output-handler
;zlib.output_handler =
; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
; http://php.net/implicit-flush
; Note: This directive is hardcoded to On for the CLI SAPI
implicit_flush = Off
; The unserialize callback function will be called (with the undefined class'
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated. A warning appears if the specified function is
; not defined, or if the function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func =
; The unserialize_max_depth specifies the default depth limit for unserialized
; structures. Setting the depth limit too high may result in stack overflows
; during unserialization. The unserialize_max_depth ini setting can be
; overridden by the max_depth option on individual unserialize() calls.
; A value of 0 disables the depth limit.
;unserialize_max_depth = 4096
; When floats & doubles are serialized, store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
; The value is also used for json_encode when encoding double values.
; If -1 is used, then dtoa mode 0 is used which automatically select the best
; precision.
serialize_precision = -1
; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file.
; Note: disables the realpath cache
; http://php.net/open-basedir
;open_basedir =
; This directive allows you to disable certain functions.
; It receives a comma-delimited list of function names.
; http://php.net/disable-functions
disable_functions =
; This directive allows you to disable certain classes.
; It receives a comma-delimited list of class names.
; http://php.net/disable-classes
disable_classes =
; Colors for Syntax Highlighting mode. Anything that's acceptable in
; <span style="color: ???????"> would work.
; http://php.net/syntax-highlighting
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.default = #0000BB
;highlight.html = #000000
; If enabled, the request will be allowed to complete even if the user aborts
; the request. Consider enabling it if executing long requests, which may end up
; being interrupted by the user or a browser timing out. PHP's default behavior
; is to disable this feature.
; http://php.net/ignore-user-abort
;ignore_user_abort = On
; Determines the size of the realpath cache to be used by PHP. This value should
; be increased on systems where PHP opens many files to reflect the quantity of
; the file operations performed.
; Note: if open_basedir is set, the cache is disabled
; http://php.net/realpath-cache-size
;realpath_cache_size = 4096k
; Duration of time, in seconds for which to cache realpath information for a given
; file or directory. For systems with rarely changing files, consider increasing this
; value.
; http://php.net/realpath-cache-ttl
;realpath_cache_ttl = 120
; Enables or disables the circular reference collector.
; http://php.net/zend.enable-gc
zend.enable_gc = On
; If enabled, scripts may be written in encodings that are incompatible with
; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
; encodings. To use this feature, mbstring extension must be enabled.
;zend.multibyte = Off
; Allows to set the default encoding for the scripts. This value will be used
; unless "declare(encoding=...)" directive appears at the top of the script.
; Only affects if zend.multibyte is set.
;zend.script_encoding =
; Allows to include or exclude arguments from stack traces generated for exceptions.
; In production, it is recommended to turn this setting on to prohibit the output
; of sensitive information in stack traces
; Default Value: Off
; Development Value: Off
; Production Value: On
zend.exception_ignore_args = On
; Allows setting the maximum string length in an argument of a stringified stack trace
; to a value between 0 and 1000000.
; This has no effect when zend.exception_ignore_args is enabled.
; Default Value: 15
; Development Value: 15
; Production Value: 0
; In production, it is recommended to set this to 0 to reduce the output
; of sensitive information in stack traces.
zend.exception_string_param_max_len = 0
;;;;;;;;;;;;;;;;;
; Miscellaneous ;
;;;;;;;;;;;;;;;;;
; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header). It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
; http://php.net/expose-php
expose_php = Off
;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;
; Maximum execution time of each script, in seconds
; http://php.net/max-execution-time
; Note: This directive is hardcoded to 0 for the CLI SAPI
max_execution_time = 30
; Maximum amount of time each script may spend parsing request data. It's a good
; idea to limit this time on productions servers in order to eliminate unexpectedly
; long running scripts.
; Note: This directive is hardcoded to -1 for the CLI SAPI
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)
; http://php.net/max-input-time
max_input_time = 60
; Maximum input variable nesting level
; http://php.net/max-input-nesting-level
;max_input_nesting_level = 64
; How many GET/POST/COOKIE input variables may be accepted
;max_input_vars = 1000
; Maximum amount of memory a script may consume
; http://php.net/memory-limit
memory_limit = 128M
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; This directive informs PHP of which errors, warnings and notices you would like
; it to take action for. The recommended way of setting values for this
; directive is through the use of the error level constants and bitwise
; operators. The error level constants are below here for convenience as well as
; some common settings and their meanings.
; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
; those related to E_NOTICE and E_STRICT, which together cover best practices and
; recommended coding standards in PHP. For performance reasons, this is the
; recommend error reporting setting. Your production server shouldn't be wasting
; resources complaining about best practices and coding standards. That's what
; development servers and development settings are for.
; Note: The php.ini-development file has this setting as E_ALL. This
; means it pretty much reports everything which is exactly what you want during
; development and early testing.
;
; Error Level Constants:
; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often result
; from a bug in your code, but it's possible that it was
; intentional (e.g., using an uninitialized variable and
; relying on the fact it is automatically initialized to an
; empty string)
; E_STRICT - run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best interoperability
; and forward compatibility of your code
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
; initial startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
; E_DEPRECATED - warn about code that will not work in future versions
; of PHP
; E_USER_DEPRECATED - user-generated deprecation warnings
;
; Common Values:
; E_ALL (Show all errors, warnings and notices including coding standards.)
; E_ALL & ~E_NOTICE (Show all errors, except for notices)
; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
; Default Value: E_ALL
; Development Value: E_ALL
; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
; http://php.net/error-reporting
error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
; This directive controls whether or not and where PHP will output errors,
; notices and warnings too. Error output is very useful during development, but
; it could be very dangerous in production environments. Depending on the code
; which is triggering the error, sensitive information could potentially leak
; out of your application such as database usernames and passwords or worse.
; For production environments, we recommend logging errors rather than
; sending them to STDOUT.
; Possible Values:
; Off = Do not display any errors
; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
; On or stdout = Display errors to STDOUT
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/display-errors
display_errors = Off
; The display of errors which occur during PHP's startup sequence are handled
; separately from display_errors. We strongly recommend you set this to 'off'
; for production servers to avoid leaking configuration details.
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/display-startup-errors
display_startup_errors = Off
; Besides displaying errors, PHP can also log errors to locations such as a
; server-specific log, STDERR, or a location specified by the error_log
; directive found below. While errors should not be displayed on productions
; servers they should still be monitored and logging is a great way to do that.
; Default Value: Off
; Development Value: On
; Production Value: On
; http://php.net/log-errors
log_errors = On
; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
; http://php.net/log-errors-max-len
log_errors_max_len = 1024
; Do not log repeated messages. Repeated errors must occur in same file on same
; line unless ignore_repeated_source is set true.
; http://php.net/ignore-repeated-errors
ignore_repeated_errors = Off
; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; source lines.
; http://php.net/ignore-repeated-source
ignore_repeated_source = Off
; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This is only effective in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
; http://php.net/report-memleaks
report_memleaks = On
; This setting is off by default.
;report_zend_debug = 0
; Turn off normal error reporting and emit XML-RPC error XML
; http://php.net/xmlrpc-errors
;xmlrpc_errors = 0
; An XML-RPC faultCode
;xmlrpc_error_number = 0
; When PHP displays or logs an error, it has the capability of formatting the
; error message as HTML for easier reading. This directive controls whether
; the error message is formatted as HTML or not.
; Note: This directive is hardcoded to Off for the CLI SAPI
; http://php.net/html-errors
;html_errors = On
; If html_errors is set to On *and* docref_root is not empty, then PHP
; produces clickable error messages that direct to a page describing the error
; or function causing the error in detail.
; You can download a copy of the PHP manual from http://php.net/docs
; and change docref_root to the base URL of your local copy including the
; leading '/'. You must also specify the file extension being used including
; the dot. PHP's default behavior is to leave these settings empty, in which
; case no links to documentation are generated.
; Note: Never use this feature for production boxes.
; http://php.net/docref-root
; Examples
;docref_root = "/phpmanual/"
; http://php.net/docref-ext
;docref_ext = .html
; String to output before an error message. PHP's default behavior is to leave
; this setting blank.
; http://php.net/error-prepend-string
; Example:
;error_prepend_string = "<span style='color: #ff0000'>"
; String to output after an error message. PHP's default behavior is to leave
; this setting blank.
; http://php.net/error-append-string
; Example:
;error_append_string = "</span>"
; Log errors to specified file. PHP's default behavior is to leave this value
; empty.
; http://php.net/error-log
; Example:
;error_log = php_errors.log
; Log errors to syslog (Event Log on Windows).
;error_log = syslog
; The syslog ident is a string which is prepended to every message logged
; to syslog. Only used when error_log is set to syslog.
;syslog.ident = php
; The syslog facility is used to specify what type of program is logging
; the message. Only used when error_log is set to syslog.
;syslog.facility = user
; Set this to disable filtering control characters (the default).
; Some loggers only accept NVT-ASCII, others accept anything that's not
; control characters. If your logger accepts everything, then no filtering
; is needed at all.
; Allowed values are:
; ascii (all printable ASCII characters and NL)
; no-ctrl (all characters except control characters)
; all (all characters)
; raw (like "all", but messages are not split at newlines)
; http://php.net/syslog.filter
;syslog.filter = ascii
;windows.show_crt_warning
; Default value: 0
; Development value: 0
; Production value: 0
;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;
; The separator used in PHP generated URLs to separate arguments.
; PHP's default setting is "&".
; http://php.net/arg-separator.output
; Example:
;arg_separator.output = "&"
; List of separator(s) used by PHP to parse input URLs into variables.
; PHP's default setting is "&".
; NOTE: Every character in this directive is considered as separator!
; http://php.net/arg-separator.input
; Example:
;arg_separator.input = ";&"
; This directive determines which super global arrays are registered when PHP
; starts up. G,P,C,E & S are abbreviations for the following respective super
; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
; paid for the registration of these arrays and because ENV is not as commonly
; used as the others, ENV is not recommended on productions servers. You
; can still get access to the environment variables through getenv() should you
; need to.
; Default Value: "EGPCS"
; Development Value: "GPCS"
; Production Value: "GPCS";
; http://php.net/variables-order
variables_order = "GPCS"
; This directive determines which super global data (G,P & C) should be
; registered into the super global array REQUEST. If so, it also determines
; the order in which that data is registered. The values for this directive
; are specified in the same manner as the variables_order directive,
; EXCEPT one. Leaving this value empty will cause PHP to use the value set
; in the variables_order directive. It does not mean it will leave the super
; globals array REQUEST empty.
; Default Value: None
; Development Value: "GP"
; Production Value: "GP"
; http://php.net/request-order
request_order = "GP"
; This directive determines whether PHP registers $argv & $argc each time it
; runs. $argv contains an array of all the arguments passed to PHP when a script
; is invoked. $argc contains an integer representing the number of arguments
; that were passed when the script was invoked. These arrays are extremely
; useful when running scripts from the command line. When this directive is
; enabled, registering these variables consumes CPU cycles and memory each time
; a script is executed. For performance reasons, this feature should be disabled
; on production servers.
; Note: This directive is hardcoded to On for the CLI SAPI
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/register-argc-argv
register_argc_argv = Off
; When enabled, the ENV, REQUEST and SERVER variables are created when they're
; first used (Just In Time) instead of when the script starts. If these
; variables are not used within a script, having this directive on will result
; in a performance gain. The PHP directive register_argc_argv must be disabled
; for this directive to have any effect.
; http://php.net/auto-globals-jit
auto_globals_jit = On
; Whether PHP will read the POST data.
; This option is enabled by default.
; Most likely, you won't want to disable this option globally. It causes $_POST
; and $_FILES to always be empty; the only way you will be able to read the
; POST data will be through the php://input stream wrapper. This can be useful
; to proxy requests or to process the POST data in a memory efficient fashion.
; http://php.net/enable-post-data-reading
;enable_post_data_reading = Off
; Maximum size of POST data that PHP will accept.
; Its value may be 0 to disable the limit. It is ignored if POST data reading
; is disabled through enable_post_data_reading.
; http://php.net/post-max-size
post_max_size = 20M
; Automatically add files before PHP document.
; http://php.net/auto-prepend-file
auto_prepend_file =
; Automatically add files after PHP document.
; http://php.net/auto-append-file
auto_append_file =
; By default, PHP will output a media type using the Content-Type header. To
; disable this, simply set it to be empty.
;
; PHP's built-in default media type is set to text/html.
; http://php.net/default-mimetype
default_mimetype = "text/html"
; PHP's default character set is set to UTF-8.
; http://php.net/default-charset
default_charset = "UTF-8"
; PHP internal character encoding is set to empty.
; If empty, default_charset is used.
; http://php.net/internal-encoding
;internal_encoding =
; PHP input character encoding is set to empty.
; If empty, default_charset is used.
; http://php.net/input-encoding
;input_encoding =
; PHP output character encoding is set to empty.
; If empty, default_charset is used.
; See also output_buffer.
; http://php.net/output-encoding
;output_encoding =
;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;
; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
;
; Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"
;
; PHP's default setting for include_path is ".;/path/to/php/pear"
; http://php.net/include-path
; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
; http://php.net/doc-root
doc_root =
; The directory under which PHP opens the script using /~username used only
; if nonempty.
; http://php.net/user-dir
user_dir =
; Directory in which the loadable extensions (modules) reside.
; http://php.net/extension-dir
;extension_dir = "./"
; On windows:
;extension_dir = "ext"
; Directory where the temporary files should be placed.
; Defaults to the system default (see sys_get_temp_dir)
;sys_temp_dir = "/tmp"
; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
; http://php.net/enable-dl
enable_dl = Off
; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; http://php.net/cgi.force-redirect
;cgi.force_redirect = 1
; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request. PHP's default behavior is to disable this feature.
;cgi.nph = 1
; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; http://php.net/cgi.redirect-status-env
;cgi.redirect_status_env =
; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
; http://php.net/cgi.fix-pathinfo
;cgi.fix_pathinfo=1
; if cgi.discard_path is enabled, the PHP CGI binary can safely be placed outside
; of the web tree and people will not be able to circumvent .htaccess security.
;cgi.discard_path=1
; FastCGI under IIS supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; http://php.net/fastcgi.impersonate
;fastcgi.impersonate = 1
; Disable logging through FastCGI connection. PHP's default behavior is to enable
; this feature.
;fastcgi.logging = 0
; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If set to 0, PHP sends Status: header that
; is supported by Apache. When this option is set to 1, PHP will send
; RFC2616 compliant header.
; Default is zero.
; http://php.net/cgi.rfc2616-headers
;cgi.rfc2616_headers = 0
; cgi.check_shebang_line controls whether CGI PHP checks for line starting with #!
; (shebang) at the top of the running script. This line might be needed if the
; script support running both as stand-alone script and via PHP CGI<. PHP in CGI
; mode skips this line and ignores its content if this directive is turned on.
; http://php.net/cgi.check-shebang-line
;cgi.check_shebang_line=1
;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;
; Whether to allow HTTP file uploads.
; http://php.net/file-uploads
file_uploads = On
; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
; http://php.net/upload-tmp-dir
;upload_tmp_dir =
; Maximum allowed size for uploaded files.
; http://php.net/upload-max-filesize
upload_max_filesize = 20M
; Maximum number of files that can be uploaded via a single request
max_file_uploads = 20
;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;
; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
; http://php.net/allow-url-fopen
allow_url_fopen = On
; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
; http://php.net/allow-url-include
allow_url_include = Off
; Define the anonymous ftp password (your email address). PHP's default setting
; for this is empty.
; http://php.net/from
;from="john@doe.com"
; Define the User-Agent string. PHP's default setting for this is empty.
; http://php.net/user-agent
;user_agent="PHP"
; Default timeout for socket based streams (seconds)
; http://php.net/default-socket-timeout
default_socket_timeout = 60
; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; http://php.net/auto-detect-line-endings
;auto_detect_line_endings = Off
;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;
; If you wish to have an extension loaded automatically, use the following
; syntax:
;
; extension=modulename
;
; For example:
;
; extension=mysqli
;
; When the extension library to load is not located in the default extension
; directory, You may specify an absolute path to the library file:
;
; extension=/path/to/extension/mysqli.so
;
; Note : The syntax used in previous PHP versions ('extension=<ext>.so' and
; 'extension='php_<ext>.dll') is supported for legacy reasons and may be
; deprecated in a future PHP major version. So, when it is possible, please
; move to the new ('extension=<ext>) syntax.
;;;;
; Note: packaged extension modules are now loaded via the .ini files
; found in the directory /etc/php.d; these are loaded by default.
;;;;
;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;
[CLI Server]
; Whether the CLI web server uses ANSI color coding in its terminal output.
cli_server.color = On
[Date]
; Defines the default timezone used by the date functions
; http://php.net/date.timezone
date.timezone = “Asia/Tokyo”
; http://php.net/date.default-latitude
;date.default_latitude = 31.7667
; http://php.net/date.default-longitude
;date.default_longitude = 35.2333
; http://php.net/date.sunrise-zenith
;date.sunrise_zenith = 90.833333
; http://php.net/date.sunset-zenith
;date.sunset_zenith = 90.833333
[filter]
; http://php.net/filter.default
;filter.default = unsafe_raw
; http://php.net/filter.default-flags
;filter.default_flags =
[iconv]
; Use of this INI entry is deprecated, use global input_encoding instead.
; If empty, default_charset or input_encoding or iconv.input_encoding is used.
; The precedence is: default_charset < input_encoding < iconv.input_encoding
;iconv.input_encoding =
; Use of this INI entry is deprecated, use global internal_encoding instead.
; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
;iconv.internal_encoding =
; Use of this INI entry is deprecated, use global output_encoding instead.
; If empty, default_charset or output_encoding or iconv.output_encoding is used.
; The precedence is: default_charset < output_encoding < iconv.output_encoding
; To use an output encoding conversion, iconv's output handler must be set
; otherwise output encoding conversion cannot be performed.
;iconv.output_encoding =
[imap]
; rsh/ssh logins are disabled by default. Use this INI entry if you want to
; enable them. Note that the IMAP library does not filter mailbox names before
; passing them to rsh/ssh command, thus passing untrusted data to this function
; with rsh/ssh enabled is insecure.
;imap.enable_insecure_rsh=0
[intl]
;intl.default_locale =
; This directive allows you to produce PHP errors when some error
; happens within intl functions. The value is the level of the error produced.
; Default is 0, which does not produce any errors.
;intl.error_level = E_WARNING
;intl.use_exceptions = 0
[sqlite3]
; Directory pointing to SQLite3 extensions
; http://php.net/sqlite3.extension-dir
;sqlite3.extension_dir =
; SQLite defensive mode flag (only available from SQLite 3.26+)
; When the defensive flag is enabled, language features that allow ordinary
; SQL to deliberately corrupt the database file are disabled. This forbids
; writing directly to the schema, shadow tables (eg. FTS data tables), or
; the sqlite_dbpage virtual table.
; https://www.sqlite.org/c3ref/c_dbconfig_defensive.html
; (for older SQLite versions, this flag has no use)
;sqlite3.defensive = 1
[Pcre]
; PCRE library backtracking limit.
; http://php.net/pcre.backtrack-limit
;pcre.backtrack_limit=100000
; PCRE library recursion limit.
; Please note that if you set this value to a high number you may consume all
; the available process stack and eventually crash PHP (due to reaching the
; stack size limit imposed by the Operating System).
; http://php.net/pcre.recursion-limit
;pcre.recursion_limit=100000
; Enables or disables JIT compilation of patterns. This requires the PCRE
; library to be compiled with JIT support.
pcre.jit=0
[Pdo]
; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
; http://php.net/pdo-odbc.connection-pooling
;pdo_odbc.connection_pooling=strict
[Pdo_mysql]
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
pdo_mysql.default_socket=
[Phar]
; http://php.net/phar.readonly
;phar.readonly = On
; http://php.net/phar.require-hash
;phar.require_hash = On
;phar.cache_list =
[mail function]
; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
; http://php.net/sendmail-path
sendmail_path = /usr/sbin/sendmail -t -i
; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail().
;mail.force_extra_parameters =
; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
mail.add_x_header = Off
; The path to a log file that will log all mail() calls. Log entries include
; the full path of the script, line number, To address and headers.
;mail.log =
; Log mail to syslog (Event Log on Windows).
;mail.log = syslog
[ODBC]
; http://php.net/odbc.default-db
;odbc.default_db = Not yet implemented
; http://php.net/odbc.default-user
;odbc.default_user = Not yet implemented
; http://php.net/odbc.default-pw
;odbc.default_pw = Not yet implemented
; Controls the ODBC cursor model.
; Default: SQL_CURSOR_STATIC (default).
;odbc.default_cursortype
; Allow or prevent persistent links.
; http://php.net/odbc.allow-persistent
odbc.allow_persistent = On
; Check that a connection is still valid before reuse.
; http://php.net/odbc.check-persistent
odbc.check_persistent = On
; Maximum number of persistent links. -1 means no limit.
; http://php.net/odbc.max-persistent
odbc.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/odbc.max-links
odbc.max_links = -1
; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
; http://php.net/odbc.defaultlrl
odbc.defaultlrl = 4096
; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of odbc.defaultlrl and odbc.defaultbinmode
; http://php.net/odbc.defaultbinmode
odbc.defaultbinmode = 1
[MySQLi]
; Maximum number of persistent links. -1 means no limit.
; http://php.net/mysqli.max-persistent
mysqli.max_persistent = -1
; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
; http://php.net/mysqli.allow_local_infile
;mysqli.allow_local_infile = On
; Allow or prevent persistent links.
; http://php.net/mysqli.allow-persistent
mysqli.allow_persistent = On
; Maximum number of links. -1 means no limit.
; http://php.net/mysqli.max-links
mysqli.max_links = -1
; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
; http://php.net/mysqli.default-port
mysqli.default_port = 3306
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/mysqli.default-socket
mysqli.default_socket =
; Default host for mysqli_connect() (doesn't apply in safe mode).
; http://php.net/mysqli.default-host
mysqli.default_host =
; Default user for mysqli_connect() (doesn't apply in safe mode).
; http://php.net/mysqli.default-user
mysqli.default_user =
; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
; http://php.net/mysqli.default-pw
mysqli.default_pw =
; Allow or prevent reconnect
mysqli.reconnect = Off
[mysqlnd]
; Enable / Disable collection of general statistics by mysqlnd which can be
; used to tune and monitor MySQL operations.
mysqlnd.collect_statistics = On
; Enable / Disable collection of memory usage statistics by mysqlnd which can be
; used to tune and monitor MySQL operations.
mysqlnd.collect_memory_statistics = Off
; Records communication from all extensions using mysqlnd to the specified log
; file.
; http://php.net/mysqlnd.debug
;mysqlnd.debug =
; Defines which queries will be logged.
;mysqlnd.log_mask = 0
; Default size of the mysqlnd memory pool, which is used by result sets.
;mysqlnd.mempool_default_size = 16000
; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
;mysqlnd.net_cmd_buffer_size = 2048
; Size of a pre-allocated buffer used for reading data sent by the server in
; bytes.
;mysqlnd.net_read_buffer_size = 32768
; Timeout for network requests in seconds.
;mysqlnd.net_read_timeout = 31536000
; SHA-256 Authentication Plugin related. File with the MySQL server public RSA
; key.
;mysqlnd.sha256_server_public_key =
[OCI8]
; see /etc/php.d/20-oci8.ini
[PostgreSQL]
; Allow or prevent persistent links.
; http://php.net/pgsql.allow-persistent
pgsql.allow_persistent = On
; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
; http://php.net/pgsql.auto-reset-persistent
pgsql.auto_reset_persistent = Off
; Maximum number of persistent links. -1 means no limit.
; http://php.net/pgsql.max-persistent
pgsql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
; http://php.net/pgsql.max-links
pgsql.max_links = -1
; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
; http://php.net/pgsql.ignore-notice
pgsql.ignore_notice = 0
; Log PostgreSQL backends Notice message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
; http://php.net/pgsql.log-notice
pgsql.log_notice = 0
[bcmath]
; Number of decimal digits for all bcmath functions.
; http://php.net/bcmath.scale
bcmath.scale = 0
[browscap]
; http://php.net/browscap
;browscap = extra/browscap.ini
[Session]
; Handler used to store/retrieve data.
; http://php.net/session.save-handler
session.save_handler = files
; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
;
; The path can be defined as:
;
; session.save_path = "N;/path"
;
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if
; your OS has problems with many files in one directory, and is
; a more efficient layout for servers that handle many sessions.
;
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
;
; The file storage module creates files using mode 600 by default.
; You can change that by using
;
; session.save_path = "N;MODE;/path"
;
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.
; http://php.net/session.save-path
; RPM note : session directory must be owned by process owner
; for mod_php, see /etc/httpd/conf.d/php.conf
; for php-fpm, see /etc/php-fpm.d/*conf
;session.save_path = "/tmp"
; Whether to use strict session mode.
; Strict session mode does not accept an uninitialized session ID, and
; regenerates the session ID if the browser sends an uninitialized session ID.
; Strict mode protects applications from session fixation via a session adoption
; vulnerability. It is disabled by default for maximum compatibility, but
; enabling it is encouraged.
; https://wiki.php.net/rfc/strict_sessions
session.use_strict_mode = 0
; Whether to use cookies.
; http://php.net/session.use-cookies
session.use_cookies = 1
; http://php.net/session.cookie-secure
;session.cookie_secure =
; This option forces PHP to fetch and use a cookie for storing and maintaining
; the session id. We encourage this operation as it's very helpful in combating
; session hijacking when not specifying and managing your own session id. It is
; not the be-all and end-all of session hijacking defense, but it's a good start.
; http://php.net/session.use-only-cookies
session.use_only_cookies = 1
; Name of the session (used as cookie name).
; http://php.net/session.name
session.name = PHPSESSID
; Initialize session on request startup.
; http://php.net/session.auto-start
session.auto_start = 0
; Lifetime in seconds of cookie or, if 0, until browser is restarted.
; http://php.net/session.cookie-lifetime
session.cookie_lifetime = 0
; The path for which the cookie is valid.
; http://php.net/session.cookie-path
session.cookie_path = /
; The domain for which the cookie is valid.
; http://php.net/session.cookie-domain
session.cookie_domain =
; Whether or not to add the httpOnly flag to the cookie, which makes it
; inaccessible to browser scripting languages such as JavaScript.
; http://php.net/session.cookie-httponly
session.cookie_httponly =
; Add SameSite attribute to cookie to help mitigate Cross-Site Request Forgery (CSRF/XSRF)
; Current valid values are "Strict", "Lax" or "None". When using "None",
; make sure to include the quotes, as `none` is interpreted like `false` in ini files.
; https://tools.ietf.org/html/draft-west-first-party-cookies-07
session.cookie_samesite =
; Handler used to serialize data. php is the standard serializer of PHP.
; http://php.net/session.serialize-handler
session.serialize_handler = php
; Defines the probability that the 'garbage collection' process is started on every
; session initialization. The probability is calculated by using gc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC process starts on each request.
; Default Value: 1
; Development Value: 1
; Production Value: 1
; http://php.net/session.gc-probability
session.gc_probability = 1
; Defines the probability that the 'garbage collection' process is started on every
; session initialization. The probability is calculated by using gc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC process starts on each request.
; For high volume production servers, using a value of 1000 is a more efficient approach.
; Default Value: 100
; Development Value: 1000
; Production Value: 1000
; http://php.net/session.gc-divisor
session.gc_divisor = 1000
; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
; http://php.net/session.gc-maxlifetime
session.gc_maxlifetime = 1440
; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other method.
; For example, the following script is the equivalent of setting
; session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; find /path/to/sessions -cmin +24 -type f | xargs rm
; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
; http://php.net/session.referer-check
session.referer_check =
; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
; http://php.net/session.cache-limiter
session.cache_limiter = nocache
; Document expires after n minutes.
; http://php.net/session.cache-expire
session.cache_expire = 180
; trans sid support is disabled by default.
; Use of trans sid may risk your users' security.
; Use this option with caution.
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
; in publicly accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
; http://php.net/session.use-trans-sid
session.use_trans_sid = 0
; Set session ID character length. This value could be between 22 to 256.
; Shorter length than default is supported only for compatibility reason.
; Users should use 32 or more chars.
; http://php.net/session.sid-length
; Default Value: 32
; Development Value: 26
; Production Value: 26
session.sid_length = 26
; The URL rewriter will look for URLs in a defined set of HTML tags.
; <form> is special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs. <form> tag's action attribute URL will not be modified
; unless it is specified.
; Note that all valid entries require a "=", even if no value follows.
; Default Value: "a=href,area=href,frame=src,form="
; Development Value: "a=href,area=href,frame=src,form="
; Production Value: "a=href,area=href,frame=src,form="
; http://php.net/url-rewriter.tags
session.trans_sid_tags = "a=href,area=href,frame=src,form="
; URL rewriter does not rewrite absolute URLs by default.
; To enable rewrites for absolute paths, target hosts must be specified
; at RUNTIME. i.e. use ini_set()
; <form> tags is special. PHP will check action attribute's URL regardless
; of session.trans_sid_tags setting.
; If no host is defined, HTTP_HOST will be used for allowed host.
; Example value: php.net,www.php.net,wiki.php.net
; Use "," for multiple hosts. No spaces are allowed.
; Default Value: ""
; Development Value: ""
; Production Value: ""
;session.trans_sid_hosts=""
; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
; Possible values:
; 4 (4 bits: 0-9, a-f)
; 5 (5 bits: 0-9, a-v)
; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
; Default Value: 4
; Development Value: 5
; Production Value: 5
; http://php.net/session.hash-bits-per-character
session.sid_bits_per_character = 5
; Enable upload progress tracking in $_SESSION
; Default Value: On
; Development Value: On
; Production Value: On
; http://php.net/session.upload-progress.enabled
;session.upload_progress.enabled = On
; Cleanup the progress information as soon as all POST data has been read
; (i.e. upload completed).
; Default Value: On
; Development Value: On
; Production Value: On
; http://php.net/session.upload-progress.cleanup
;session.upload_progress.cleanup = On
; A prefix used for the upload progress key in $_SESSION
; Default Value: "upload_progress_"
; Development Value: "upload_progress_"
; Production Value: "upload_progress_"
; http://php.net/session.upload-progress.prefix
;session.upload_progress.prefix = "upload_progress_"
; The index name (concatenated with the prefix) in $_SESSION
; containing the upload progress information
; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
; http://php.net/session.upload-progress.name
;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
; How frequently the upload progress should be updated.
; Given either in percentages (per-file), or in bytes
; Default Value: "1%"
; Development Value: "1%"
; Production Value: "1%"
; http://php.net/session.upload-progress.freq
;session.upload_progress.freq = "1%"
; The minimum delay between updates, in seconds
; Default Value: 1
; Development Value: 1
; Production Value: 1
; http://php.net/session.upload-progress.min-freq
;session.upload_progress.min_freq = "1"
; Only write session data when session data is changed. Enabled by default.
; http://php.net/session.lazy-write
;session.lazy_write = On
[Assertion]
; Switch whether to compile assertions at all (to have no overhead at run-time)
; -1: Do not compile at all
; 0: Jump over assertion at run-time
; 1: Execute assertions
; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1)
; Default Value: 1
; Development Value: 1
; Production Value: -1
; http://php.net/zend.assertions
zend.assertions = -1
; Assert(expr); active by default.
; http://php.net/assert.active
;assert.active = On
; Throw an AssertionError on failed assertions
; http://php.net/assert.exception
;assert.exception = On
; Issue a PHP warning for each failed assertion. (Overridden by assert.exception if active)
; http://php.net/assert.warning
;assert.warning = On
; Don't bail out by default.
; http://php.net/assert.bail
;assert.bail = Off
; User-function to be called if an assertion fails.
; http://php.net/assert.callback
;assert.callback = 0
[mbstring]
; language for internal character representation.
; This affects mb_send_mail() and mbstring.detect_order.
; http://php.net/mbstring.language
mbstring.language = Japanese
; Use of this INI entry is deprecated, use global internal_encoding instead.
; internal/script encoding.
; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)
; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
mbstring.internal_encoding = UTF-8
; Use of this INI entry is deprecated, use global input_encoding instead.
; http input encoding.
; mbstring.encoding_translation = On is needed to use this setting.
; If empty, default_charset or input_encoding or mbstring.input is used.
; The precedence is: default_charset < input_encoding < mbstring.http_input
; http://php.net/mbstring.http-input
mbstring.http_input = UTF-8
; Use of this INI entry is deprecated, use global output_encoding instead.
; http output encoding.
; mb_output_handler must be registered as output buffer to function.
; If empty, default_charset or output_encoding or mbstring.http_output is used.
; The precedence is: default_charset < output_encoding < mbstring.http_output
; To use an output encoding conversion, mbstring's output handler must be set
; otherwise output encoding conversion cannot be performed.
; http://php.net/mbstring.http-output
mbstring.http_output = pass
; enable automatic encoding translation according to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
; portable libs/applications.
; http://php.net/mbstring.encoding-translation
mbstring.encoding_translation = On
; automatic encoding detection order.
; "auto" detect order is changed according to mbstring.language
; http://php.net/mbstring.detect-order
mbstring.detect_order = auto
; substitute_character used when character cannot be converted
; one from another
; http://php.net/mbstring.substitute-character
mbstring.substitute_character = none
; Enable strict encoding detection.
;mbstring.strict_detection = Off
; This directive specifies the regex pattern of content types for which mb_output_handler()
; is activated.
; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
;mbstring.http_output_conv_mimetype=
; This directive specifies maximum stack depth for mbstring regular expressions. It is similar
; to the pcre.recursion_limit for PCRE.
;mbstring.regex_stack_limit=100000
; This directive specifies maximum retry count for mbstring regular expressions. It is similar
; to the pcre.backtrack_limit for PCRE.
;mbstring.regex_retry_limit=1000000
[gd]
; Tell the jpeg decode to ignore warnings and try to create
; a gd image. The warning will then be displayed as notices
; disabled by default
; http://php.net/gd.jpeg-ignore-warning
;gd.jpeg_ignore_warning = 1
[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
; With mbstring support this will automatically be converted into the encoding
; given by corresponding encode setting. When empty mbstring.internal_encoding
; is used. For the decode settings you can distinguish between motorola and
; intel byte order. A decode setting cannot be empty.
; http://php.net/exif.encode-unicode
;exif.encode_unicode = ISO-8859-15
; http://php.net/exif.decode-unicode-motorola
;exif.decode_unicode_motorola = UCS-2BE
; http://php.net/exif.decode-unicode-intel
;exif.decode_unicode_intel = UCS-2LE
; http://php.net/exif.encode-jis
;exif.encode_jis =
; http://php.net/exif.decode-jis-motorola
;exif.decode_jis_motorola = JIS
; http://php.net/exif.decode-jis-intel
;exif.decode_jis_intel = JIS
[Tidy]
; The path to a default tidy configuration file to use when using tidy
; http://php.net/tidy.default-config
;tidy.default_config = /usr/local/lib/php/default.tcfg
; Should tidy clean and repair output automatically?
; WARNING: Do not use this option if you are generating non-html content
; such as dynamic images
; http://php.net/tidy.clean-output
tidy.clean_output = Off
[soap]
; Enables or disables WSDL caching feature.
; http://php.net/soap.wsdl-cache-enabled
soap.wsdl_cache_enabled=1
; Sets the directory name where SOAP extension will put cache files.
; http://php.net/soap.wsdl-cache-dir
; RPM note : cache directory must be owned by process owner
; for mod_php, see /etc/httpd/conf.d/php.conf
; for php-fpm, see /etc/php-fpm.d/*conf
soap.wsdl_cache_dir="/tmp"
; (time to live) Sets the number of second while cached file will be used
; instead of original one.
; http://php.net/soap.wsdl-cache-ttl
soap.wsdl_cache_ttl=86400
; Sets the size of the cache limit. (Max. number of WSDL files to cache)
soap.wsdl_cache_limit = 5
[sysvshm]
; A default size of the shared memory segment
;sysvshm.init_mem = 10000
[ldap]
; Sets the maximum number of open links or -1 for unlimited.
ldap.max_links = -1
[dba]
;dba.default_handler=
[opcache]
; see /etc/php.d/10-opcache.ini
[curl]
; A default value for the CURLOPT_CAINFO option. This is required to be an
; absolute path.
;curl.cainfo =
[openssl]
; The location of a Certificate Authority (CA) file on the local filesystem
; to use when verifying the identity of SSL/TLS peers. Most users should
; not specify a value for this directive as PHP will attempt to use the
; OS-managed cert stores in its absence. If specified, this value may still
; be overridden on a per-stream basis via the "cafile" SSL stream context
; option.
;openssl.cafile=
; If openssl.cafile is not specified or if the CA file is not found, the
; directory pointed to by openssl.capath is searched for a suitable
; certificate. This value must be a correctly hashed certificate directory.
; Most users should not specify a value for this directive as PHP will
; attempt to use the OS-managed cert stores in its absence. If specified,
; this value may still be overridden on a per-stream basis via the "capath"
; SSL stream context option.
;openssl.capath=
[ffi]
; see /etc/php.d/20-ffi.ini
ブラウザでのPHP動作確認
PHP 8.0が本当にインストールされたかを確認するため、インストールされている PHP の情報を表示する。
phpinfo 関数を実行する PHP ファイルを /var/www/html/info.php として作成します。
vi /var/www/html/info.php このコマンで開いて
<?php phpinfo(); ?>
を記入します。
httpd(apache)の再起動
systemctl restart httpd
ブラウザで下記のURLを記入して確認
http://＜IPアドレス＞/info.php
下記のように表示すればOKです。
まとめ
AlmaLinuxは、CentOS8と操作性が似ており、使いやすかったです。
CentOSの終了が近づいており、AlmaLinuxへ移行検討されている方の助けになればと思いました。
スポンサーリンク
